Lamination question
Edward in Vancouver
Looks like one of my projects this winter will be a complete re-make/remodel of my bench.
I want to save and re-use my top. It is 72" x 20" and made from 2 salvaged maple baker's tables. It's currently at 1 1/2" thick and swiss cheesed with holes on a 6" grid. Of course, I'd like to make it thicker, say at 4" thick and also deeper, at 24". Problem is money....
I'd like to make the extra 4" deep chunk to deepen my bench from 2x8 fir or spruce. I imagine I could rip the lumber down the middle giving me about 31/2" width, glue on a "veneer" of, oh, say 3/4" to 1" of solid Eastern maple to each strip, then glue the whole assembly together, and glue this assembly to my existing top.
I'd also like to do the same treatment to my existing top--make an assembly of common softwood and glue this to the underside of the top to beef up the thickness.
However I am not very knowledgeable about wood movement, and especially with different species of wood.
The bench is in my garage which is insulated but not heated. I have very little--if any rust problems with my tools.
Would this work?
Edward






