Choosing a Hammer?
Charles Jackson III
I am looking at getting a hammer for carpentry work, but I will use the hammer in the shop as well. I am looking at a Vaughan 99 16 oz rip claw hammer or a Estwing 16 oz curved claw hammer.
Knowledge You Can Build On — Est. 1998
Choosing a Hammer?
Charles Jackson III
I am looking at getting a hammer for carpentry work, but I will use the hammer in the shop as well. I am looking at a Vaughan 99 16 oz rip claw hammer or a Estwing 16 oz curved claw hammer.
Re: Choosing a Hammer?
R Payne
Rough or finish carpentry? Both?
Have you decided on a handle material? I like wood handles, they don't vibrate like metal but still feel solid unlike fiberglass.
Expect to pull a lot of nails with it?
Or hammer in tight places?
There are many questions that go into tool choosing. The result us usually many tools.
ron
Re: Choosing a Hammer?
Charles Jackson III
I will use it for rough and finish carpentry.
Re: Choosing a Hammer?
Robin Corell in Atascadero CA
Not sure where you live, but here in California were legally allowed to own more than one hammer.
For rough framing I use a 27oz corrugated face Vaughn with a wood handle I made, for finish carpentry I use a 20oz smooth face Craftsman with a fiberglass handle( I found this on a job site years ago), For in the shop I use a 10oz continental pattern with a wood handle I made.
Robin
Re: Choosing a Hammer?
Charles Jackson III
I live in Alabama, most carpenters I see around here has a 16 oz.
Re: Choosing a Hammer?
Bruce, a MN Galoot
I've used nothing but a 16-ounce fiberglass-handled Plumb for the last 50 years, for both rough and finish carpentry. The rubber grip is getting pretty hard and slick, though.
Re: Choosing a Hammer?
Jack Guzman from Maine
Charles,I use a 16oz. anti vibration straight claw hammer for carpentry. If I have a lot of nailing to do anything else causes wrist and arm pain. I like a curved claw around the shop. I really like my old bell-head stanley with the wood handle. Actually I have alot of hammers. I have them hanging all around the shop. Hammers are usually real cheap at flea markets. There are some real gems out there. Most people can't tell one hammer from another.---Jack
Re: Choosing a Hammer?
Ron in Sterling, CT
The "hammer of choice" is really a personal one. Get one that is comfortable in your hand. I personally like a 16 oz curved claw hammer with a wooden handle. Like Jack, I have numerous hammers, but usually go for only 1 or 2 of them. As someone has already mentioned, stay away from steel handled hammers. The vibration is something you don't need. Good luck.
Ron
I like Anti Vibe *LINK*
Thomas Skaggs, Foothills of Mount Level
Here is a hammer I like a lot:
Stanley Anti-Vibe Hammer
Re: I like Anti Vibe( I'll second that!)
Stuart Hough
Charles, I also have the Stanley Anti-Vibe hammer. I use it for all my heavy-duty and carpentry-type work. It is balanced perfectly for my swing, and the lack of vibration is a wonder to behold! Just for qualification in the multi-hammer club, I also have three Warrington pattern hammers, and old Craftsman fiberglass-handled 16 oz hammer, a ball-pein hammer of questionable birth, and an "every household needs one" tack hammer, all of which I have used in the last 6 months. Oh! And I have a rubber mallet and a dead-blow hammer, not to mention the 3 lb short-handled sledge. (Oops! Scratch everything after "behold. It might seem as though I'm gloating, which I really am not
)
Re: Hart if you can find one
TomD
The original Harts are just the sweetest thing, like hitting a driver on the screws. Unfortunately the new ones are a little cyborg for me.
Wait a second, here they are. I bought all axe handles but they look great, but the straight handles are better. Axes are good when framing because usually you have a lot of space, but for something like finish carpentry, the studs bays have long since been filled in, and the axe handle is a little more restricted.
www.highlandwoodworking.com/dead-oneaglecaliforniaspecialframinghammer21oz.aspx
Current favourites are the Douglas:
http://www.highlandwoodworking.com/douglas15ozfinishhammer.aspx
There are cheaper prices, but you can see the idea here.
I also like stiletto titanium, but it is total nonsense that they hit above their weight, so they are best for those situations where you need to carry more than you will be hitting.
https://stiletto.com/p-45-10-oz-titanium-smooth-face-straight-16-finish-hammer.aspx
Re: A 16 is the only one
Bruce McCrory
Hickory, good hickory is great, but... I have a dead-peoples (inherited) 16oz Pexto that I always use; just because I am a masochist. Nails stick in the claw. The head is loose, so a divot remains also, caused by wedges and nails after pulling nails. I can swing it all day, and I need new shoulders.
Used a 16 when I was 4 and learning to miss my fingers. And toes.
I do have something about twice as heavy that gets put away (for a 16) earlier every year. It will send a 16d home in two swings.
Somebody had to... *LINK*
Choosing a hammer
Re: Somebody had to...
William Duffield
ROTFLMAO! I think that guy nailed it.
…or, as Wilbur would say, "$300 is a lot of money."
I use a 22 oz. Plumb fiberglass handled straight claw construction hammer. Other hammers I use include a warrington pattern (I think it's 8 oz.), a Chester Tool Works brass and lignum vitae plane hammer, a Taiwanese black rubber dead blow hammer that leaves black marks, a 12# sledge, and several wooden carvers mallets and a carpenter's mallet that I made. I have others, but these are the ones I use.
Re: Quick! before they think I'm crying.
Bruce McCrory
My sleeves are gubbered up!