What happened.....
Bill Tindall
All the poly(vinyl acetate) adhesives are "latexes". A latex in this context is a suspension of tiny balls of polymer (PVA) in water. The suspension is stabilized so that it doesn't crash out of suspension and the polymer balls are mushy from one reason or another such that they coalesce into a tough film of cured adhesive as the water leaves. Something caused the suspended polymer balls to agglomerate into cottage cheese in your case. Not clear what. Freezing or addition of a salt of some kind are the usual suspects but in your case I don't have a clue. However, you were wise to toss it.
So long as it doesn't loose water regular yellow glue last indefinitely. There is a small loss through the bottle walls that will become significant after some years. The glue will thicken. It may not wet the wood properly if it becomes thickened. No wetting, no adhesion.



