New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

"Pegs and Tails" anyone

Posts

Re: "Pegs and Tails" anyone

#26

drawer evolution

Bill Tindall

I find it curious that drawers slowly evolved and eventually settled into slips, or not. It certainly didn't take 300 years to figure out the best way to make a drawer, so what (tools and or timbers) was available to make the drawer must have influenced this evolution.?. Particularly puzzling was the English habit of running the grain the length of the drawer. Every drawer I see made this way is busted, not surprisingly. If someone ever publishes "The history of Drawers, Theory and Practice" I want to buy it.

I once had a drawer tour in the Philly museum. At one period the drawers were made from white cedar- shingle stock. So I think every construction detail has some practical history to be discovered.

Re: "Pegs and Tails" anyone

#27

Re: Not me!

Sgian Dubh

Typically there are dividerss, which run horizontally between stacks of drawers, and then there are vertical dividers which separate drawers on the same level.

I think nomenclature varied quite a bit, even when places are not what we nowadays would consider far apart. For example, there were (and are even now with the internet and stuff) significant differences in the names of tools, joinery, and furniture parts between, say, Edinburgh and Newcastle, which are about 100 miles apart. But to add to the linguistic differences, significantly, Edinburgh is in Scotland and Newcastle is in England. Slainte.

Re: "Pegs and Tails" anyone

#28

Re: "Pegs and Tails" anyone

Kees

Very enjoyable blog. Thanks for pointing it out.