We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
No, I mean the green fuzzy stuff for inside boxes, etc.? I have a Singer sewing machine that I am repairing and the inside of the small front drawer is flocked with a green flock to imitate suede leather.
Question is do I have to remove the old flock before applying new stuff? WoodCraft sells the stuff with a colored adhesive.
I have used it on many small drawers for Jewelry Cases. I have always applied it to new wood, but I would think you could scuff sand off much of the existing flock, then apply new. The adhesive is like a paint, goes on real easy, then apply the flock, let it dry, then shake off the excess that didn't adhere. Done.
I agree with Ron. Just like any finishing technique a lot depends on surface preparation. The flocking instructions specifying sealing the surface to be flocked. I used shellac. So I would suggest to sand away the old flocking and then put on a surface sealing layer so that the flocking glue won't be wicked into the base.
Thanks to everyone that offered information. I did get a personal visit from Michael Donaldson, he said I needed to buy the flocking tool, which made the job much easier.
When I was working for a franchise of a major supplier of woodworking stuff, we sold a lot of it. Never used it myself, but AFAIK, we never got complaints from those who used it, and I've seen completed projects that looked really nice. It's not beize, but for applications like yours (French fit), beize or felt cloth just wouldn't be practical. The glue is really sticky, so you have to be careful with its application, and don't work where there are flies, moths, or very small birds flying around. The flocking applicator is an incredibly simplistic tool, but it works well.