We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Here is a picture of my granddaughter's toy box again.
The reason that I am reposting it is two fold. The first is I am totally proud of it. The second is I agonized over how I would cushion the lid as it slammed down on her fingers?????
Solution: a small shock absorber that is a little larger than a standard Bic lighter. It is made by Blum. I am not a salesman, own stock, etc. It's in the lower right hand corner. Part #971A. It mounts with a wood screw but needs some creative containment (more screws or glued blocks) to keep it in position.
It is mounted back by the hinge and two of them stopped my 3/4" X 20" X 30" door (when it was released at about 70* open) with about 2" to go. It then slowly closed without a sound. At about $7.00 each, what's not to like??
I purchased them in Grand Rapids, at a store that is known for its furniture hardware selection.
The wood came from my property, my parents farm and from industrial pallets. Large coils of steel are delivered to where I work on maple, cherry, oak, and walnut pallets. I have 400-500 cubic feet of recycled pallet boards.
The shock absorbers are supposed to be used to cushion doors on cupboards so they don't slam. The salesman started thinking outside the box and said "Maybe these will solve your problem." This was a breath of fresh air after looking in catalogs at $25.-$125. cushions.
Glad it helped you Bill. This is why I posted my solution!