New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Keystone

Posts

Keystone

#1

Moses Yoder

Keystone

Moses Yoder

This is for my own kitchen I am pricing; we probably won't build it for at least a couple years but I need to figure out what I want and how much it will cost. It is a shaker style / arts & crafts kitchen. The cabinet and door frames will be select brown hickory, the panels will be rustic hickory. In the picture is a valance that will go over my sink. A matching design will be over my stove but that will actually be on a door that hinges up. I looked at google images for keystones and found one and measured the sides at 18° from vertical. I ended up making this one 16° to get what I thought were a little better proportions. The keystone would be a 3/8" thick piece of wood glued on the face of the panel assembly, wrapped around the bottom flush to the back. The panels set back 1/4". What is your opinion of this design?


Re: Keystone

#2

Re: Keystone

Bill Tindall

It looks attractive to me.

See if you can round up some rift cut material for the door frames as this plain grain sets off a patterned panel better.

Re: Keystone

#3

Re: Keystone

Thomas Skaggs, Foothills of Mount Level

Design is fine. Perhaps consider a 1/2" setback to give it a little more pronouncement?

T.

Re: Keystone

#4

Re: Keystone

Patrick Gibbons

Moses,

Your design looks to me art deco, very similar to many architectural motifs I've seen on many buildings across the southwest. That doesn't mean it won't fit in with arts and crafts, but viewed alone I would call it art deco.

Re: Keystone

#5

Re: Keystone

roninkokomo

I like it a lot!!

Re: Keystone

#6

Re: Keystone

CStan

Is that a thumbnail profile near the top?

Re: Keystone

#8

Re: Keystone

Robin Corell in Atascadero CA

It's a nice design, but I don't think it is consistent with an arts and crafts or shaker vernacular.

Robin

Re: Keystone

#9

I see no shaker infulance at all...

scott

Looks Art-Deco to me. Not a bad thing. I like the design.

What wood(s) you thinking about using?

Re: Keystone

#10

Ellis Walentine

Re: Keystone

Ellis Walentine

I'm a tough critic, Moses, and I think you're heading in the right direction on these pieces. For what it's worth, my eye senses proportions, relationships between elements and so forth, and I'm thinking the keystone needs more context. In the context of that width, does the angle of the keystone work for you? To me, it relates to the arch that you've structured, and the angles of the edges, including the keystone, should be perpendicular to that curve at every point. Color, relief and possibly texture would add to the composition.

I don't know how these proportions will relate to the rest of the cabinetry, or to your overall kitchen environment, but they're fun.

Ellis