Re: So you don't find it awe inducing.
TomD
I'm not sure about drawboring. Rare to find something like that without a split. And also rare to find it on fine furniture.
Knowledge You Can Build On — Est. 1998
Re: So you don't find it awe inducing.
TomD
I'm not sure about drawboring. Rare to find something like that without a split. And also rare to find it on fine furniture.
alternative
bill tindall
I drill a pilot hole in one end of the mortise to the target depth. The hole, slightly smaller than the mortise width, takes seconds to drill and it provides both clearance for chips and targets the depth.
i need to get out of the shop more often
Mark Hennebury
How else would you cut it? I thought thats the way everyone did them.
What is the "typewriter method" 
i am seriously out of touch...what year is it?
So, what do we call you? James? Jim?
Bruce, a MN Galoot
Let me be clear about this: I liked the video very much. It's the clearest demonstration of chopping mortises that I've seen, giving me an idea of how to use those Narex chisels I got on sale from LV last year. Seeing as how I tend to make mortises with my Makita router and a jig (Tage Frid style), this is a new method for me.
Mark said the video wasn't "awesome" or even particularly useful. Jack said it was "excellent." I agree with Jack. I was just pointing out that whether something is called "awesome" very well might be an artifact of what generation one happens to be a part of.
Wicked...
John in NM
Didn't know that was in use all the way down to Boston 
"Finest kind" had fallen out of regular use by the time I was in HS, but I still knew what it meant
Even heard a few of dad's friends say it now and then...
Agree
Ron in Kokomo
I think the video is useful.
Re: i need to get out of the shop more often
TomD
Typewriter. I think they mean the method where the chisel is moved along starting from the ends, either to the other end, or in from the ends rather than out from the middle. So you make your first cut. Then you make your second cut and then pry, third and pry, and so forth. All the cuts are undermined. It works also. I was just taught to excavate by alternating bevel direction. I agree it is just a fairly average sequence, but I guess we a re back in breaker land where it is all new to someone.fr
Re: i need to get out of the shop more often
Mark Hennebury
Thanks Tom,
While you are at it can you also tell me what the " ruler trick" is?
Mortise chopping technique
Wiley Horne--So. Calif.
Hi Mark and all,
Like you, I find the V approach the most efficient and effective. But one more often sees mortise chopping taught in a different way.
For example, here is a link to a "fairly standard cabinetmaker's approach" as shown by Jeff Gorman, an astute and highly-regarded teacher:
http://www.amgron.clara.net/practicemortise37.html
This is what I referred to as the typewriter method. A shallow row is chopped, then repeated. I should quickly add that Mr. Gorman has a link at the bottom "Chopping Techniques", where he illustrates other methods, including the drill-hole-at-one-end method cited by Bill Tindall, and also the V method.
The reason I was enthused about the video James showed, is that I see the V method presented much less frequently than methods which begin with chopping the first course to 1/4" or so all the way across, either left to right or from center outwards in each direction. Nothing wrong with doing it that way--why not live and let live with however folks want to do things? I just prefer the V method, and the video is a good illustration of its effectiveness.
I seem to recall Odate illustrates the V method in his book, and there was a lengthy discussion of the subject on OldTools a few years back.
What are others' favorite methods? It's an interesting subject IMO!
Wiley
Re: Mortise chopping technique
Mark Hennebury
Hi Wiley,
Thanks for the link and the typewriter explanation.
I see that Jeff show several ways... interesting. thanks.
Re: Ruler
TomD
If you have a blade, like a plane blade that is long and flat. Lay it back down with the non cutting end, supported by a ruler or any other spacer. The blade could even have the "ruler" built in as some plane blades had a doubler on the top of the blade.
In this position the back of the blade is at a very slight angle, and if it were sharpened at that angle it would be repeatable, and provide the back sharpening that is required for a super honed edge. Never use it myself but it would certainly speed up the rate at which the some would get a good polish on either side of the blade.
The question has been raise as to whether this method is compatible with the recent breaker discussion/method.
Re: Ruler
Mark Hennebury
Okay, thanks. So its just a term for a way to reference a micro back bevel angle. Done it, many times but not familiar with the term.
Thanks again.
Re: Ruler
TomD
Yeah, no offense to David Charlesworth who is an absolutely superb video teacher I would recommend to anyone at the appropriate level, but it's one of those regular things that has the name where most people first saw it. Anyone from an earlier age is going to go "what?".
I was at Toshiro's in Seattle once, and the owner there went into a riff on sharpening using to-hand jigs. He had hundreds of them. I am normally really patient, or grateful, about that kind of thing, but I was rushing for a ferry, or something, and I just had to go. He had enough tricks to make all of the world's video teachers independently famous on sharpening tricks alone. I wish I had had more time to really get them down.