New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Plane mouths, Seaton Chest

Posts

Re: Plane mouths, Seaton Chest

#27

Re: Some things to calculate

Chris

Not sure about your bump hypothesis. Somewhere I read that wood behaves like visco-elastic material. One might think of it as material that "flows" where the properties of the flow (viscosity) depends in some form or fashion on the force/speed/temperature applied. If I recall correctly the author analyzed the cutting behavior of rotary machinery (and was way to difficult for me to understand), no idea who this would would apply for linear cutters.

Re: Plane mouths, Seaton Chest

#28

Re: Some things to calculate

Kees

Yes, that's why I undertook a test with a real plane on real wood, instead of just theorising the tight mouth to death.

A tight mouth does indeed make a big difference, compared to an open mouth. But I found the capiron effect stronger and easier. I had to file the mouth carefully to make it square to the iron. Then I had to set and reset the iron a couple of times to move the frog into the ideal spot. Adjusting the frog on a Bailey plane is a bit of chore.

But you could envision someone setting up a plane especially for this purpose. And that would be a legimate approach. I just think at this moment that an open mouth with a close set capiron works better, also when taking heavier shavings.

Re: Plane mouths, Seaton Chest

#29

Thanks!

Tony - Memphis

That gives me something to start with. Funny, not too long ago I read soemthing that said the chipbreaker should be back from the edge! I'm anxious to give this a shot.

Thanks for the help.

Tony