New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Not really tool making.....

Posts

Not really tool making.....

#1

Not really tool making.....

roger lance

I've been on the lookout for a nice pair of used Starrett trammels for a long time with no luck. So when Woodsmith e-mailed me an idea for a poor man's trammel set, I realized that this idea was way better than what I had and it would be a means to use up some scrap....also I had an old Ace awl with a broken tip that I could repurpose.....so:



I made two beams.....a 24" for general use and a 48" for those rare occasions when that length might be needed. It works nicely....good little project.

Re: Not really tool making.....

#2

Re: Not really tool making.....

TomD

Wow. Needs better hardware.

Re: Not really tool making.....

#3

The nice thing about this design...

Bill Houghton, Sebastopol, CA

...is that you can change or upgrade it as needed. For instance, if you had to scribe a really large circle, with a radius longer than your arms could handle, you could firmly fasten, at the center point, a peg the diameter of one of your tool-holder holes, and focus on moving just the pencil/scribe end. Which makes it superior to my Stanley trammel points, which require infinitely-adjustable arms on the mechanic, or an apprentice, for huge circles.

And if you ever score a rosewood-handled scratch awl, you can replace your current one for some added fancy.

If you can sort out how to grind the point on your scratch awl off-center, you can get fine adjustment for your radii - some of the Starrett trammel points use this method.

Nice, simple design, made right at home - hard to beat!

Re: Not really tool making.....

#4

Better hardware !!??......

roger lance

all of the women I use to be married to don't refer to me as cheap for nothing you know.... :D .

Re: Not really tool making.....

#5

Re: Better hardware !!??......

Jerry Gibbs

Now I have a use for the stripped out phillips screwdrivers I have been saving.

Re: Not really tool making.....

#6

Re: Better hardware !!??......

TomD

Those were two separate thoughts by the way. Meaning I like your work, I think the hardware is letting you down.

You aren't as miserably cheap as you might think. I would have nice hardware on the beam, and nothing as fancy on the wife. Of course only while she lets me.

Re: Not really tool making.....

#7

Re: Better hardware !!??......

roger lance

Tom....I will confess that I did go about trying to find some 1/4" brass rod....but I would have to buy a whole 36" (or 48"....memory going) length....so if I find a small 6" piece somewhere/sometime, I'll replace the awl and make it more purdy....what do ex-wifes know anyway ??