New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Sad what this site has come to

Posts

Sad what this site has come to

#1

Sad what this site has come to

Rocky

I remember when you could ask lots of easy handtool questions and within hours it would be answered by lots of folk. Now this hand tool forum is alot of of topics stuff. Its nice that you folks answer questions about FLOWERS? here but help the rest. In highest regards, thank you WWC.

Re: Sad what this site has come to

#2

Jack Guzman from Maine

I don't know...

Jack Guzman from Maine

I've been visiting here for ten years and it seems the same to me. The conversations are getting pretty involved but we will still answer simple woodworking questions. It's just that noone has asked any lately. Got a question? Fire away.---Jack

Re: Sad what this site has come to

#3

Re: Sad what this site may come to

roger lance

Rocky made inquiries on a Stanley 904 tool chest on the 9th and 13th. I personally don't know about this chest and I'm not a Stanley collector but I'm under the impression that there are books/catalogs that profile the Stanley line. Also there are probably net sites dedicated to Stanley tools that might have the sought after information. Good luck.

Re: Sad what this site has come to

#4

Easy question?

Bill Tindall

I looked at you post. In my many years of making stuff I never encountered that tool kit. It is not the sort of collection of tools I can imagine a woodworker buying for any purpose. You are going to get the information you need from collectors of this kind of thing not woodworkers. It seems unfair to criticize Forum participants for being unfamiliar with this collectors item.

What sort of tool chest is it? A toy chest? It struck me as a strange collection of tools.

Re: Sad what this site has come to

#5

Re: Sad what this site has come to

CStan

http://www.cs.cmu.edu/~alf/en/tool-lists/boyer.txt

*904 Stanley Tool Chest with Twelve Tools. This oak chest is in

nice condition with a full large-size Stanley decal inside. The

tools include some very rare models: No. 12 Hammer, 10 oz size

(Rare and Good+); Disston Hand Saw, Small 16-inch size (Rare and

correct, Good+); No. 1 Winterbottom's Patent Combination Try and

Mitre Square (Good+); No. 50 Everlasting Chisel, 1/2" (Good+);

No. 68 Rule (near New); Screwdriver (near New); Auger bit 1/2"

(New); Auger bit 1/4" (New); No. 921 8-inch brace (Fine+); No. 61

marking gauge (Fine); No. 102 block plane (Fine); and No. 707

Bench Vise (scarce and Good+). A super set of very nice tools,

including the impossibly hard-to-find Saw and Hammer, $395

Re: Sad what this site has come to

#6

Re: Sad what this site has come to

CStan

http://swingleydev.com/archive/get.php?message_id=32468

Stanley Tool Chest No. 903

Made of hardwood, finished in a dark stain and varnished. Tops and

bottoms set in. Joints nailed and glued. There are three hinges, two

catches and a carrying handle.

11 1/4 inches wide, 4 inches deep, 21 inches long. Weight 16 lbs.

Price $20.00

No. 903 contains 17 tools as follows:

1 hammer, 13 oz., No. 12

1 Screw Driver, 5 in., No. 20

1 Screw Driver, 3 in,. No. 50

1 Rule (Zig Zag), 4 ft., No. 04

1 Saw (Hand), 16 in.

1 Try and Miter Square, 7 1/2 in., No. 2

1 Marking Gauge No. 62

1 Plane (Block), 7 in., No. 220

1 Chisel, 1/4 in., No. 50

1 Chisel, 3/4 in., No. 50

1 Bit Brace, 8 in., No. 945

1 Auger Bit, 1/4 in.

1 Auger Bit, 3/8 in.

1 Gimlet Bit No. 6

1 Screw Driver Bit, 5/16 in., No. 26

1 Awl No. 1

1 Vise No. 741

Re: Sad what this site has come to

#7

Amen

roninkokomo

There are hundreds of us maybe thousands who are deliriously happy here. I am in strong agreement w Bill. This is primarily a hand tool woodworking site.

Ron

Re: Sad what this site has come to

#8

Re: Sad what this site has come to

eliot d

Gee, I'm fairly new here. and I ask a lot of questions. They always get answered.

Re: Sad what this site has come to

#9

A question for this forum....

Thomas Skaggs, Foothills of Mount Level

....what is a chip breaker? Hopefully this is something someone here will answer.

I'm kidding!!! ;-)

Re: Sad what this site has come to

#10

Ellis Walentine

What you can expect here

Ellis Walentine

Hi Rocky,

I'm sorry you didn't get the prompt and relevant answers you expected. That is by far the exception rather than the rule, but, this said, our traffic varies with the seasons, and there may be times when nobody who views your question has an answer for you. That happens to me occasionally, too.

When I started this site many years ago, my partner Jim Cummins used to try to make sure no question went unanswered, because he felt, as you do, that we're here not only to encourage discussion but also to offer at least some acknowledgement of each question. We've tried to keep up that tradition over the years, but as I said, there are no guarantees.

You've had a couple replies here today. I hope they are useful to you.

Ellis Walentine, Host

Re: Sad what this site has come to

#11

Ellis Walentine

Um, would that be...

Ellis Walentine

.... someone who sits on a bag of Fritos? :\

Re: Sad what this site has come to

#12

No,no,no...

Bob Hackett

A "chip breaker" is the 16 year old bagger down at the local grocery store who insists on putting your chips in the bag first and then piles your canned goods on top of them. If you aren`t buying chips during that particular visit I have found they are equally adept at "breaking bread". :(

Re: Sad what this site has come to

#13

I resent that!

Jerry Nicholson

When I was a 16 year old grocery bagger/carryout/shelf_stocker/floor_cleaner, I never never set the canned goods on the chips or the bread! I did set a box of matches on fire in a grocery sack when I put a cantaloupe on top of it though. Come to think of it that was 60 years ago. Maybe chips and bread hadn't been invented yet.

Jerry

Re: Sad what this site has come to

#14

That must have been some cantaloupe!

John in NM

Ahhhh... I loved those pre-Nader matches you could actually snap with your thumb :D

Still must have been quite the melon though :D

Re: Sad what this site has come to

#15

Re: Sad what this site has come to

CStan

On your behalf, I've asked the question of Patrick Leach of Patrick's Blood and Gore fame.

Re: Sad what this site has come to

#16

Cantaloupes are a fire hazard?

Bill Houghton, Sebastopol, CA

One of the many things teenagers are missing out on nowadays is the stories that you gather in those low-wage teenager jobs. Yours trumps the stories I've got from that part of my life.

Re: Sad what this site has come to

#17

Re: Sad what this site has come to

TomD

I thought he was joking. When I am around I will answer pretty much any question. I even hang it out there answering questions were at best I can manage just a slice if it, which I am sure annoys some people, and doesn't make me feel very smart, but we actually are committed to answering all questions. Plus sometimes if one makes a bad answer that draws out the better answers, so it is like taking a hit for the team.

I would ask what you have contributed here? The people getting the answers are pretty much parked on a one way street. Since we lost the stats, at least on the version I see, I don't even know if people are reading stuff I may have spent a lot of time getting up. Yesterday I tried to answer the Shaker box question because I have both a book, and a copy of Ellis' old mag with a great article in it. I wasted probably an hour looking and didn't find anything. That takes away from stuff I do around here, and might actually get thanked for.

That said. My dad has a Stanley 3, but other than that, I hate Stanley. The Fat Max tape I have that dropped off a truck is pretty cool.

Re: Sad what this site has come to

#18

I try not to post replies that say,

Bill Houghton, Sebastopol, CA

"Darned if I know."* Which is what I'd have said to your questions.

I admire your desire to complete the box, which I bet was once someone's birthday/Christmas present, now in nice if incomplete condition.

*well, not very often, anyhow.

Re: Sad what this site has come to

#19

YES!!  That is the answer


Re: Sad what this site has come to

#20

Thanks for the reminder about Jim

roninkokomo

What a class act.

Re: Sad what this site has come to

#21

Re: Sad what this site has come to

david weaver

The one nice thing about this site is that it's a site that discusses function, and not a collector's site.

Your question should've been directed to collectors, I've also never heard of what you asked about.

Re: Sad what this site has come to

#22

Re: Sad what this site has come to

roger lance

on messages, a member asks how to eliminate pet odor and gets more responses than a guy who shows extensive photos of a tool chest he has made....now that is sad for a woodworking site.

Re: Sad what this site has come to

#23

Re: Sad what this site has come to

David Weaver

??

All of this apples to oranges stuff and then criticism of the community as a whole makes no sense.

If there's something you want to change then initiate it.

Re: Sad what this site has come to

#24

Re: Sad what this site has come to

roger lance

I just did.

Re: Sad what this site has come to

#25

depends on your metric for success

Bill Tindall

Maybe 500 people viewed the tool chest. I am glad 500 people didn't clutter the site with a polite "nice chest". You know my views on spending valuable time on shop furniture and I kept it to myself and didn't offer a response. On the other hand maybe 20 people visited the pet odor post and some had information to offer and did. I had no interest or information about pet odor (hell I live on a farm and the whole place has "pet odor") so I didn't open the post.

So how do you score the success of WoodCentral? I was among the silent majority that viewed the tool chest and had nothing useful to say and I didn't view pet odor. I look at two kinds of posts. If the title suggests I can offer useful information I open it and I don't care the topic. Or if the title suggests a wood working topic I open it. For the record I'm satisfied with how its working.