Lets see your Roubo do this!
TomD
I needed to move a 200 pound sewing machine upstairs to what I laughingly call the "clean room".
After about 45 I started to look for ways never to exert myself at such tasks. So I needed a bridge crane, and didn't want to have to spend any money for it.
Presto.
I did contribute one 2x10 that got ripped, but could be used again. Other than that it is my Japanese bench and Krenov saw horses. The winch came from a device I put together to lift panels when dry walling the shop.
I ripped the board on the TS, because I had it out for a window building project. The holes were drilled with a gimlet brace. And there was some chisel work to fair the escapement for the Dynex cable. Splices and the soft shackle were made with hand tools that were made by hand.





