New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Gifts for Kato, Kawai and Mia

Posts

Gifts for Kato, Kawai and Mia

#1

Gifts for Kato, Kawai and Mia

Bill Tindall


I will be sending these to those named in appreciation of their assistance in making the Kato-Kawai planing work available.

These pencils accommodate the "innards" of the Pentel drafting pencils. The curly ones are hard to turn. The wall thickness at the tip is only 1/32" and when the grain is standing on end there is not strength down there to support shaving formation. They usually explode during the final cuts. I tried stabilizing the grain by saturating it with cyanoacrylate adhesive and it seemed to work. Woods are sycamore and walnut.

Re: Gifts for Kato, Kawai and Mia

#3

Re: Gifts for Kato, Kawai and Mia

Sandor in Middletown, DE

Nice looking pens - now I want a set of my own. I just pulled apart the same model here at my desk.

Can you tell me how you drilled the hole?

Looks like it has an internal shoulder to prevent the guts from pulling out the front when you tighten the tip. Did you blind drill the major bore and thru drill the minor bore?

Any tips you could pass on besides the cyanoacrylate before I waste a bunch of time and pen blanks?

Thanks!

Sandor

Re: Gifts for Kato, Kawai and Mia

#4

Beautiful, indeed and thoughtful- thank you 


Re: Gifts for Kato, Kawai and Mia

#5

Nice gesture....

roger lance

its been about 8 days or so since I showed that Moxon, now its you, Bill, who has made/shown something....how long before the next thing??

Re: Gifts for Kato, Kawai and Mia

#6

the stepped hole

Bill Tindall

Buy the step drill from Nick Cook or one of the companies that make step drills. The depth of the hole, length of the blank and amount the tip is cut off are all coordinated. I will email the sizes tonight and if I don't remind me

Re: Gifts for Kato, Kawai and Mia

#7

need advice

Bill Tindall

Grand daughter will be visiting next week (she is 5). We will make a Post Office Door Bank. Any other ideas of stuff she might participate in making. I made her a stool which she drags around to access things she shouldn't.

Tomorrow I spray the final coat on grandmothers china cabinet and a friend is bringing over a tea table(awesome carving) to spray but these activities are not of hand tool interest.

Re: Gifts for Kato, Kawai and Mia

#8

Re: need advice

roger lance

What about building a bird house....something she could put up in her back yard and watch for birds....or a bird feeder. Hope you don't think these suggestions are for the birds.

Re: Gifts for Kato, Kawai and Mia

#10

Re: did those two during last visit

roger lance

how about a doll house??....might take more than one visit....and plywood definitely has its place in that project!

Re: Gifts for Kato, Kawai and Mia

#11

Re: Gifts for Kato, Kawai and Mia

mark Hennebury

I would be happy to offer a few business card holders to the package

Re: Gifts for Kato, Kawai and Mia

#12

good idea

Bill Tindall

send to

Bill Tindall

888 Christian Bend Road

Chruch Hill, TN 37642

If you do the laser engraving put the university name on.

Re: Gifts for Kato, Kawai and Mia

#13

Re: Gifts for Kato, Kawai and Mia

wilbur

That's a wonderful gift!

Re: Gifts for Kato, Kawai and Mia

#14

Re: Gifts for Kato, Kawai and Mia

TomD

I hope this isn't going there with the suggestion that there was something new in the video. Thank whomever you want about whatever you want, but don't make it sound like US woodworking was oblivious to these facts.