New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Nails and molding

Posts

Nails and molding

#1

Nails and molding

Patrick Gibbons

I have found myself using moldings on the last two projects which I've attached with glue. This is because the nails I've found to use in this capacity are still too big ( they show too much), bend so easily that they need to be pre-drilled and don't really have any holding power to speak of. Other than a nail gun, what are some of you doing with nails in this application?

Re: Nails and molding

#2

Re: Nails and molding

Texchappy

http://www.toolsforworkingwood.com//Merchant/merchant.mvc?Screen=PROD&Store_Code=toolshop&Product_Code=BT-HBRAD.XX&Category_Code=&Search=nails

I haven't used these but what I was thinking of using for doing moldings as you're talking about. Have you (or anyone else) tried these?

Re: Nails and molding

#3

David Barnett

(Message Deleted by Poster)


Re: Nails and molding

#4

Stephen Shepherd

Re: Nails and molding *LINK*

Stephen Shepherd

I use the fine cut headless nails. You have to orient the wedge with the grain and use a brad awl for pilot holes.

Stephen


Fine Cut Headless nails

Re: Nails and molding

#5

Re: Not nails, but...

Texchappy

Nice tip David.

Re: Nails and molding

#6

Leo Cuellar

Re: Nails and molding

Leo Cuellar

A nail spinner might be an alternative worth considering, for limited applications, however I couldn't find one for sale, even on ebay. I just used mine two weeks ago, so I'm not giving it up! :D

Sad to see another piece of technology deemed irrelevant.

Re: Nails and molding

#7

Re: Nails and molding

Jerry Gibbs

I have not tried this, but in the absence of a nail gun, can you put a nail in a drill motor and spin it in most of the way? Might be worth trying on some scrap.

Re: Nails and molding

#8

I use "cut" nails

Bill Tindall

They come in many sizes and if I need one smaller I cut the end off. I find some place in the grain to drill (always drill) and drive it. I usually modify the hole profile to something irregulare before filling so the filled area just looks like some color variation in the wood. I was searching for how I fastened some moulding in moderate light recently and had a hard time finding the nails.

For max holding power use coated nails. Crimp the head in a vice to make a rectangular head profile then file the head flat. Once set it looks like a cut nail but holds better. (Tip from Jeff Headley)

Re: Nails and molding

#9

Pilot holes- number drills are you friend

Bill Tindall

I am surprised that so few woodworkers own a set of number drills. With such a set one always drills perfect sized pilot holes.

Re: Nails and molding

#10

Nail spinner?

Bill Tindall

If it was April 1 I would think you were pulling my leg.

Re: Nails and molding

#11

Christian is a craftsman's craftsman....

roger lance

that is the old school way of attaching moldings to cabinets that allows for movement....found these days in only the best work....wish there was more info on how he attaches those frame and panel backs to his pieces (another rarity).

Re: Nails and molding

#12

David Barnett

(Message Deleted by Poster)


Re: Nails and molding

#13

Re: Christian is a craftsman's craftsman....

roger lance

David....I'm thinking that he must secure the back from inside the case and that it is done in a way to allow removal of the back (my guess)....can't see him just attaching it directly....that would show and he is too cleaver for that....looking forward to what you can find. BTW, that is another way of attaching moldings....from inside of the case where the molding is nailed/screwed to the case from the inside with the nail/screw not visible from the outside....observation of movement is again made where needed.

Re: Nails and molding

#14

Re: Christian is a craftsman's craftsman....

roger lance

After studying #3, it is possible that he has glued that frame and panel back into a rabbet....thus explaining the use of quarter-sawn rails/stiles and the attainment of "tremendous rigidity" to the carcass with the added back....it will be interesting to hear what is in your notes.

Re: Nails and molding

#15

No, they're real; or they were, anyhow *LINK*

Bill Houghton, Sebastopol, CA

Looks like Sears has, or had, them on clearance; probably originally made by Vermont American, who appears not to be making them anymore.

I've never owned one; the principle seems simple enough. The spinner grips the nail and spins it in like a drill bit, leaving just the last part for you to set yourself. Never having used one, I don't know whether they're worthwhile.


http://www.craftsman.com/craftsman-nail-spinner/p-00902601000P

Re: Nails and molding

#16

Re: Nails and molding

joel moskowitz

With fine Cut Headless nails, most of the time you don't have to pre drill. you don't have the wedging action that splits the wood with the grain, the the wedging action that is with the grain just keeps the nail in tighter.

I had a customer who was putting back together a 17th century French paneled room that was being installed in some apartment and all the molding, and paneling had been removed and they needed to reassemble everything. As it happened a lot of the "17th" century paneling had early 20th century tool marks and nails but that didn't both anyone (not unusual actually). they reused a lot of the old nail holes where possible but also did tons of nailing themselves. Cut nails saved a lot of predrilling - and looked more period anyway.

Re: Nails and molding

#17

Jack Guzman from Maine

Re: Pilot holes- number drills are you friend

Jack Guzman from Maine

I discovered those while researching clock repair accessories. Using a fine wire drill in a pin vise and brass pins I was able to attach moldings to hold in glass in a clock door. Very delicate work.---Jack