New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

How much plywood do you use?

Posts

Re: How much plywood do you use?

#26

Re: Apply come common sense

TomD

Keep in mind Bill:

- People in wood factories suffer very adverse effects, if they don't today, those factories are cleaner than our shops. Many amateurs today are involved in essentially full time activities in places that would never pass OSHA.

- Some people have sensitivities. Allergies, or develop them over time.

- About 30% of the population is pretty dang resistant, can work with urushiol, in a fiberglass factory, etc... The local catamaran factory (gone post '08) on their employment site, specified that only applicants with zero medical record of allergies should apply. So the idea that "hey factory workers are fine" is not valid when taken against the general population.

- Some of these products are simply unpleasant. The green MDF I came across was used in production spinning wheels. The spinners don't want to sit there all day smelling some crap, unless maybe Oprah endorsed it.

Re: How much plywood do you use?

#27

Re: There's plywood and then there's plywood

TomD

Marine ply is overkill for most stuff including boats. There are exterior plys that have the same construction, except:

Inner venners are not continuous, this means there are neat butt joints, we are not talking voids or knots.

Glue is normally the same, but less is used.

Can be species used in some exteriors that would not pass marine, but at times this is an advantage.

The main thing marine ply brings to the table is the ability to survive constant immersion in water. That is to say, get soaked completely through. This is not even a specification required for most of todays high performance boats, that are sheathed and epoxy coated. So the wood will not get permanently wet, and exterior normally survives damage related wetting handily.

Just mention this because a lot of people believe that marine grade is necessary for even boating uses, and it does cost up to 6x more.

The other issue these days, even from reputable makers, is that marine grade 1088, say, ply is often bogus. I assume this does not apply to Brunzeel, or Joubert, etc... But the rating is often just what the same manufacturer who is taking poached wood through the back door has stamped on the wood going out the front door. So in a lot of ways plywood is like solid wood, you need to be able to grade it.

Re: How much plywood do you use?

#28

David Barnett

(Message Deleted by Poster)


Re: How much plywood do you use?

#29

Re: It was NOT a stupid question...

Texchappy

Sorry if I took it wrong, just sensitive today after getting news from the Army about what they're doing to me. I probably over reacted and apologize.

Re: How much plywood do you use?

#30

Never could wrap my head around organic stuff

John in NM

But I can well imagine production is stinky, if other cellulose operations like a paper mill are anything to go by.

Re: How much plywood do you use?

#31

Absolutely disagree, Bill

Bruce, a MN Galoot

I have a friend who is so allergic to formaldehyde, formaldehyde preparations and off-gassing of that sort that it causes a near-fatal spike in her blood pressure. Anecdotal, maybe, but not to her. It has nearly killed her on several occasions.

It IS something to be wary of.

Re: How much plywood do you use?

#32

Army intelligence - the best oxymoron of all time


Re: How much plywood do you use?

#33

Blue vs Green markings


Re: How much plywood do you use?

#34

So are peanuts....

John in NM

A thing to be wary of if you suffer from that allergy.

It does raise an interesting question - are exposure limits to be defined by extreme cases or the center of the bell curve? I'm sure I don't know the answer, from a moral point of view.

Re: How much plywood do you use?

#35

depends on your perspective

Bruce, a MN Galoot

If you're the one keeling over, it probably doesn't matter much. The only thing I'm allergic to is morphine, but I don't get much of that. In fact, last time was 40 years ago.

Re: How much plywood do you use?

#36

don't rely on friends family or the internet

Bill Tindall

Any time one wonders about the toxicity of something it is a simple matter to request the Materials Safety Data Sheet (MSDS) on that material. This document will contain the most reliable information on the topic. Any other source is suspect. Read it, apply some common sense, and act as you see fit.

Re: How much plywood do you use?

#37

Re: don't rely on friends family or the internet

TomD

Yeah, right when they can't get their next breath, look up the MSDS, maybe it isn't as bad as it seems.

Re: How much plywood do you use?

#38

How many hardwoods require MSDS?


Re: How much plywood do you use?

#39

Re: Maccassar Ebony Should,