New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Tote size ? . . .

Posts

Tote size ? . . .

#1

Tote size ? . . .

steve mackay

Working on something like my 8th plane restoration. So far the biggest has been a #6. Now its a #7. Untill now getting replacment totes (and knobs) has been straight forward for the more common sizes. I cruise Da' Bay and watch for my size. My question is : is there actually a difference in tote sizes ? Is the tote for a #7 or #8 bigger than a #5 ? Or am I agonizing over something silly ?

Re: Tote size ? . . .

#2

Tote sizes generally are the same.....

roger lance

but this is a great place to agonize over something silly. Look up Droz's Olde Tyme Stanley Totes & Knobs....for planes 4 1/2 - 8, he offers totes of the same size.

Re: Tote size ? . . .

#3

...the same...within the range mentioned

Bill Houghton, Sebastopol, CA

You're no doubt already aware that the tote on No. 4 and smaller planes does not have the extra screw at the front of the foot of the tote (let's call it the tote toe), presumably there on the larger sizes with the expectation that the larger sizes would be used for coarser work (and in some cases have wider irons) and thus need the extra strength.

It gets complex, though: the No. 40 scrub plane doesn't have a screw at the tote toe, even though it gets worked pretty hard; nor does the tote on the No. 62 (at least not on my examples), though I think that's for lack of room.