Additional LV Offering....
roger lance
See http://www.leevalley.com/us/wood/page.aspx?p=69302.....
definitely cleverer!!
Knowledge You Can Build On — Est. 1998
Additional LV Offering....
roger lance
See http://www.leevalley.com/us/wood/page.aspx?p=69302.....
definitely cleverer!!
Environmental concern
Bill Tindall
I am concerned whether it is bisphenol A-free (BPA-free). The clearly higher productivity this device enables means more heat generated and transferred to the shavings and the shroud which, in turn, could release BPA vapors to the confined environment of the shop. Canada has banned BPA plastics but because this accessory is made from recycled material, which could be collected from rivers flowing into the Great Lakes from the south, the concern is relevant.
Frankly, I think LV's research dollars would have been better spent developing the home shop version of the computer interfaced laser scanner for measuring sharpening stone flatness.
This'd fly off the shelf !
Re: Environmental concern
Curt Putnam
I believe they have a WiFi interferometer kit coming that can not only measure stone flatness to 0.0000001 but can also measure edge sharpness to the same accuracy albeit with some error tolerance. Additions are planned that enable measuring mortise and drill holes and another addition is coming that will check panel flatness. A tenon checking part is contemplated. Not yet released to manufacturing is a sensor for the plane shroud that measures shaving thickness and width.
Also contemplated is the appropriate statistical software to use the data thus generated so that one may compare the generated data with the theoretical models as well as the plane shaving variations. From the data one may optimize stone flatness for each grit.
Re: Yeah well...
TomD
They could easily sell that if it actually worked. Mostly meaning if the shavings would not plug the hose. I have no doubt people would buy that.
And........
Bill Tindall
post the results for all to envy!
Re: Additional LV Offering....
charlie belden
Another April First release of yet another innovative improvement by Veritas to an old tried and true tool design. And it works with a Festool dust extractor - a Canadian/ German collaboration" One can't imagine what future innovations will come from this get together.
Robin, your Propeller Heads have done it again!
April Fools
Jim in Burlington ON
Sweet April Fools Joke. Fella did look quite a bit like someone who teaches hand tool use.
Re: Westjet
TomD
I heard about the kid free flights and was kinda angry. I'm long kids, and normally pretty bitter about the whole deal, but I guess one also gets defensive at times to. I was looking for somewhere to complain for about 5 minutes. Turns out to have been this:
http://www.youtube.com/watch?v=M4SkoJy3D0M
Re: Additional LV Offering....
David Hay Denver
I wonder how many "real" tool ideas come out of the r&d of these April Fool tools?