New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Continuous arm Windsor

Posts

Continuous arm Windsor

#1

Jack Guzman from Maine

Continuous arm Windsor

Jack Guzman from Maine

This is a practice chair. I built it to learn all the processes involved. It is a complex process with many new skills to master. I really need to work on my turning. Those leg profiles were made presentable with sandpaper. I love carving the seat blank. Getting all the angles right is the most difficult part for me.

I just started carving a new seat blank for the first keeper.

I would love to go to Michael Dunbar's windsor school but it won't happen in my lifetime,so I got my lessons out of books. Alot of trial and error involved. Curtis Buchanan's videos sure came in handy.

Thanks for looking---Jack

Re: Continuous arm Windsor

#2

Re: Continuous arm Windsor

Bill Houghton, Sebastopol, CA

Lovely. Continuous arm Windsors are amazing chairs - that complex, three-dimensional bend just seems like it'd be hard to conjure out of a stick and thin air.

Re: Continuous arm Windsor

#3

Nice job

ron in kokomo

Made one a few years ago. Your first one is better than mine.

Re: Continuous arm Windsor

#5

Re: Continuous arm Windsor

Hank Knight

Jack,

That's a great looking chair! Continuous arm Windsors are my favorite style. Nice job. I can't wait to see your first "keeper."

Hank

Re: Continuous arm Windsor

#6

Nice!

John in NM

Did you bend the back?

I can sympathize with the turning, I do a bit more with sandpaper or a file than is really right :D A few catches at the wrong time and I just get too jumpy to do anything else.

Re: Continuous arm Windsor

#7

Very nice chair!

Chuck Nickerson

Having built a sack-back Windsor in a class, I can imagine the effort that went into the chair.

Re: Continuous arm Windsor

#8

Jack Guzman from Maine

Steam bent

Jack Guzman from Maine

Yes, I bent that piece using steam. It's alot simpler than it looks.---Jack

Re: Continuous arm Windsor

#9

Jack Guzman from Maine

Re: Very nice chair!

Jack Guzman from Maine

Thanks. Once I get this one right,a sack back is my next effort.---Jack

Re: Continuous arm Windsor

#10

Jack Guzman from Maine

Re: Continuous arm Windsor

Jack Guzman from Maine

I love that part. Steam bending is kind of magical.---Thanks---Jack

Re: Continuous arm Windsor

#11

Jack Guzman from Maine

Re: Nice job

Jack Guzman from Maine

Thanks but actually,this isn't my first chair. My first one was a comb back and it is a funny looking chair. Crooked in every way possible.---Jack

Re: Continuous arm Windsor

#12

Jack Guzman from Maine

Re: Continuous arm Windsor

Jack Guzman from Maine

I like this style especially myself. Thanks for the kind word.---Jack

Re: Continuous arm Windsor

#13

Pretty darn good for a practice chair

Bruce, a MN Galoot

Heck, it's pretty darn good for a keeper! Very nice job, Jack.

A bunch of years ago I made a continuous arm Windsor in the style of Thomas Moser, with a laminated continuous arm. After that experience, I would imagine a steam-bent arm is much easier. You did a really nice job on that.

I am curious, though, what about this chair makes it not a keeper? I understand building one for practice, but what refinements do you think it needs? I'm not seeing it.

BTW, will this one be painted?

Re: Continuous arm Windsor

#14

Jack Guzman from Maine

Re: Pretty darn good for a practice chair

Jack Guzman from Maine

It looks good because I did a good job of covering up the screwups. What really sinks it as a keeper though is the arm posts. When I drilled them,I didn't lean them out far enough and you have to be skinny to sit in it. Otherwise it's not really bad. I realized the arms were wrong early on but there was no practical way to correct it. So from that point on it was a "practice chair".I love the way it feels,it fits me perfect,so it's now my new shop chair. Yes I am going to paint it. I'm experimenting with milk paints and I'll cover the paint with BLO.thanks---Jack

Re: Continuous arm Windsor

#15

Re: Steam bent

Greg Betit

I think you're being too humble. Working that crest/arm piece while straight, imagining which part will end up oriented which way after the 2 dimension bending is for me a real brain teaser, and I have class notes to go by! Then getting the material steamed just right and bent along the forms just the speed and way they need to be without issues is another hurdle. I usually make 3 blanks to steam just so's I'll have one good enough to be a part of a chair. It doesn't always take that many, but walking away without any usable parts really takes the wind out of your sails! DAMHIKT.

greg

Re: Continuous arm Windsor

#16

Re: Continuous arm Windsor

Ron in Sterling, CT

Excellent job Jack. There aren't many shops around with a shop chair of that caliber.

Ron

Re: Continuous arm Windsor

#17

Re: Pretty darn good for a practice chair

Pam Niedermayer

Looks great to me, beautiful work, Jack. Did the too closely placed arms result from a combination of the bending and support, or was the support sufficiently powerful to squeeze the arms?

Pam

Re: Continuous arm Windsor

#18

Jack Guzman from Maine

Re: Pretty darn good for a practice chair

Jack Guzman from Maine

The arm is flexible.If the posts were at the correct angle the arms would easily bend to fit. Also that angle is adjustable with a little applied heat .---Jack

Re: Continuous arm Windsor

#19

Jack Guzman from Maine

Re: Continuous arm Windsor

Jack Guzman from Maine

Thank you.

Re: Continuous arm Windsor

#20

I see, thanks.


Re: Continuous arm Windsor

#21

Re: Pretty darn good for a practice chair

Bruce, a MN Galoot

When I made that Moseresque chair, I found it necessary to make a jig to drill the spindle holes in the seat. The rail/arm was only 1-1/8" thick (oval shaped) but it had very little flexibility. It would be nigh until impossible to drill those holes by eye. Ya done good!

Re: Continuous arm Windsor

#22

Look at the positive side

Bill Houghton, Sebastopol, CA

It'll encourage you to keep weight off.

Re: Continuous arm Windsor

#23

Jack Guzman from Maine

Re: Look at the positive side

Jack Guzman from Maine

:D I never thought of that. It'll keep oversize people from breaking my chair too.---Jack

Re: Continuous arm Windsor

#24

Re: Cheater-Boots way of turning

TomD

If you want an easy way to clean up your best efforts turning that will leave you with a bigger halo than sandpaper, is probably easier, and certainly faster, and allow you to cut crisp details... Set your rest at a height such that a skew, flat on the rest like a scraper, can be tipped so the top bevel is pretty near parallel to the floor, and the edge is at a height that is near the middle of the piece. If the edge were below the median it would tend not to cut. However, if it is too high, it could catch. Just gently stroke the surface with the edge and you will get fine shavings, and leave a very clean surface. You will still want to do a very light final sanding, to blend the surface textures of your various tools. The best skew of this kind of work is one with a convex edge, like Raffan has described in his various books. I like a long point and quite an obvious convexity. Some of the Raffan skews in the catalogs are pretty subtle.

Re: Continuous arm Windsor

#25

Jack Guzman from Maine

Skews are cursed

Jack Guzman from Maine

They do such a fine job when all goes well but one slip and you're done.I got a run of confidence after watching Curtis Buchanan in his videos on chairmaking.He doesn't sand at all. This lasted just until I destroyed a leg with one little slip. I'm going to try your tip but not on an almost finished leg.

I do most of my turning with a 1" roughing gouge.I keep it good and sharp.I practice with the skew alot but I still don't trust it.---Jack