New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Gone to the dogs.

Posts

Re: Gone to the dogs.

#26

Quoting you

Bill Houghton, Sebastopol, CA

"It's a bit like those schools in art or fashion that from time to time idealize human forms that, were are at least told, could not deliver a baby. Though having delivered a baby myself..."

Were you cheating there and using the verb two different ways, or were you christened Thomasina?

Re: Gone to the dogs.

#27

Ellis Walentine

Re: An essential bench

Ellis Walentine

Actually, the woodworker in that picture is Makoto Imai, photographed in my back yard in 1985. It's the real deal. As to whether there needs to be a distinction between cabinetmakers and timberframers, I dunno. Seems to be a response to needing to get the job done and to having a way to do it.

Ellis

Re: Gone to the dogs.

#28

Re: Gone to the dogs.

Charles

I'm curious about what you intend to do with that many dogs.

Re: Gone to the dogs.

#29

Re: Gone to the dogs.

Charles

And the vise slide again- I've never used that sort of hardware. Is the plate supposed to show, or be covered by the thickness of the jaws?

Re: Gone to the dogs.

#30

Re: Gone to the dogs.

Derek Cohen (in Perth, Australia)

Hi Charles

What am I to do with all the dogs? Why, breed them of course. I'm curious to see what happens when you cross Jarrah stock with Roubo dreams. What do you think the offspring will look like? A Tough guy with a French accent?

"A dog for every dog hole!" That is every benches dream. Actually, it means no more hunting for a dog. They are recessed and out of the way when not in use. And this means that the holes are sealed against shavings, etc, and do not clog up and prevent the dog being inserted.

The plate underneath? That is the design ...

Under side of bench...


Looking into the tail vise (wagon vise) ...


Dogs can be raised to desired height ...


Dog in the vise meets first dog on the bench ...


Regards from Perth

Derek

Re: Gone to the dogs.

#31

Re: Gone to the dogs.

Charles

Is that the "wagon wheel" vise from .... help me remember the name of the manufacturer.....

Re: Gone to the dogs.

#33

Re: The wagon vise?

Charles

That's the mfg.... is this the product you used?

Re: Gone to the dogs.

#34

Re: The wagon vise?

Derek Cohen (in Perth, Australia)

Yes, that is the product I used.

Originally I was planning on building my own wagon vise. This is not a difficult task. However, the design of the Benchcrafted version differs in two important ways. The first is that the handle does not move position from against the end cap when the dog traveller is moved in-or-out. This is important for spacing saving, given the tightness of the space I have. I was able to build the bench about 6" longer as a result. Secondly, the construction is bullet-proof. It needs to be as the traveller is offset to the screw, which places high stresses on the materials and fit. I do not have the means of replicating this construction. Benchcrafted do a superb job.

Why the interest in this vise?

Regards from Perth

Derek

Re: Gone to the dogs.

#35

Re: The wagon vise?

Charles

Never know, might need one....

Re: Gone to the dogs.

#36

Re: The tool well

Sgian Dubh

Derek, an interesting and somewhat unconventional tool well solution. I've never given any credence to any of the cited disadvantages of incorporating a tool well in a bench. The objections to the facility are mostly specious as far as I'm concerned. It's not hard to clean out a tool well, nor do things get lost (unless you're a rather messy and disorganised worker), and the obstruction potential for clamping up or laying out frames is a minor inconvenience solved by moving the tools in the well around, or putting them in the toolbox, etc. Not everyone has a toolbox I suppose, but mine sits right behind where I stand when I'm working at the bench. I'm in the habit of putting all the tools used during the day back in the toolbox when I'm finished so they are ready for use the next day. Taking a brush to the bench top, including the tool well is a trivial task to finish tidying up. I suppose some people don't do a daily clean up hence there could be an accumulation of junk and clutter.

I'm not sure why you indicate that a wide bench is "generally placed against a wall". I've worked on benches up against walls, and always found them to be restricting. Putting a bench against a wall always seems to be a response to limited space, and of course it has to be done sometimes; but given the choice it always seems to be vastly more convenient if there's room to work all around whatever bench you have, whether the bench is small or large. Slainte.

Re: Gone to the dogs.

#37

Re: Note quite done yet...

charlie belden

You need to put your name on it and the date - so some woodworker in the distant future will know who built this amazing bench - and when.

A friend, as a token of appreciation for what to me was a very small favor, made a dozen of these brass medalions for me. So far, only my workbench aka Das Bench has warranted putting my name on it ; )

Most of the rest will remain Anonymous.


img