New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Sharpening station progress.....

Posts

Sharpening station progress.....

#1

Sharpening station progress.....

roger lance

Somehow I managed to get sick last week and lose a number of shop days so progress has slowed. But the internal structure is now complete and I will be adding 100 pound full extension drawer slides next.


I've been looking at the Accuride slides (from Mexico) offered by Woodcraft at 20% off this month and the slides at Home Depot which are less expensive (probably from China). Anyone have recommendations on drawer slides??....experience with these brands?? Also, I used some 2 x 4s from Home Depot for the internal structure. I'm able to find some very clear, knot free, long running grained stock that is very stable and only 6% water content (according to my handheld meter) which I've found handy to have in the shop for jigs, wedges, push sticks, etc. So I made use of it here.


Thanks for looking.

Re: Sharpening station progress.....

#2

Re: Sharpening station progress..... *LINK*

Pam Niedermayer

Nice strong looking structure.

You may want to check at Rockler for these Blum on sale, a great accidental find.

I went there to show you what I prefer, wooden center mounted slides: http://www.rockler.com/product.cfm?page=198&site=ROCKLER and walked into a huge sale they're having.

I prefer the wooden because they're hideable and quiet and easier to install and makeable by me, totally, and they seem better for finer furniture. I'll probably use them in my kitchen drawers. However, I have nothing against the metal side slides, they're easy enough to install and keep working forever, and great for shop furniture.

Pam


Blum 100 lb special

Re: Sharpening station progress.....

#3

Re: Sharpening station progress.....

roger lance

Pam....I did find a local granite shop that boasted 2 thousand granite remnants. So I was hoping to be able to say that I found a granite top, but they want nearly $400 for a piece that is 24 1/2" x 44" with a very basic edge. They claimed the cost was not related to the granite but to the cutting and edge work (as a table the edge would go all around the piece). Its funny how some things continue to appeal even when you know the cost is too much (probably could do a laminate top for $50)....but that granite sure is attractive....like a LN 51 at $500....despite that cost, it stays on my mind.

Re: Sharpening station progress.....

#4

Re: Sharpening station progress.....

Guillaume Dery

Here's a thought... considering it's shop furniture, do you really need that edge? REally all you care about is the flat tom. I think a rough edge would look smashing in a sharpening station and save you a couple of hundred bucks

Re: Sharpening station progress.....

#5

Re: Sharpening station progress.....

Pam Niedermayer

Seems to me that many here have bought big granite pieces for little money, for sharpening; but maybe that honeymoon is over. At any rate, I wouldn't pay that much, not even close, maybe $100 at most; but then I'm cheap. How about slate? Or a big rock? Or smaller pieces tiled? Or wood with polyurethane? I really don't much like laminates, even when I put them together. :)

Or as Guillaume suggest, get the unfinished edge. Maybe a stone chisel would be a good investment.

Pam

Re: Sharpening station progress.....

#6

Re: Sharpening station progress.....

roger lance

It occurred to me that one of the reasons that this business had amassed 2,000 remnants was that they were charging so much money for a remnant that people were not buying from them at that price level. Shucks and other words . Even the laminate route is a little strange....use to be able to buy laminate in the big box stores in small pieces....ie a 1/4....1/2 sheet. Now many have stopped selling laminate all together or you must buy a whole sheet (4' x 8')....or you can get a smaller piece (like 30" x 48") but it will be shipped to your house from some central warehouse at a price that equals the cost of a full sheet!! I've used white laminate on various surfaces in the shop, but if I have to get a full sheet, I'll have a life time supply on hand after the little sharpening table and get to store that for a long time. Just where did I leave that Jack Daniels???......

Re: Sharpening station progress.....

#7

Re: Sharpening station progress.....

Pam Niedermayer

I've moved on to Glenlivet, thanks to a cigar bar in New Orleans; but I have to make big savings to afford even one drink every few months. :)

Anyhow, this problem can't be intractable. How about making essentially a darkroom sink? That's very easy, make a shallow sink and paint the interior with marine paint. You could even add a drain. Might be a superior solution. Now that I think of it, I might build another one of these to house the Makita horizontal grinder, make it low.

Or buy one of those office tables and trash the legs? Or, at the prices you mention, maybe stainless?

Pam

Re: Sharpening station progress.....

#8

Re: Sharpening station progress.....

Bruce, a MN Galoot

Thanks for the update. That is going to be one fine looking cabinet as well as highly functional. I'm a firm believer in the kind of construction you're putting into this.

I'm equally impressed that you were able to find such good lumber at the Borg. The planets must be lined up right. Maybe they were trying to deal with that incoming solar flare.

Please post what you decide on those full extension slides. I'm planning a rolling cabinet and at least the bottom drawer will have to hold 100# of stuff, maybe even two drawers.

Re: Sharpening station progress.....

#9

Re: Sharpening station progress.....

roger lance

Bruce....Lee Valley also has 100 pound full extension slides that have a good price and assumed quality (not sure about the maker) and LV is about due for a period of free shipping. But like that watched pot that never boils, LV has not made that free shipping announcement. I'll probably go with the Accuride slides from Woodcraft.

Re: Sharpening station progress.....

#10

Re: Sharpening station progress.....

AZ in Colorado Springs

I've used Gras full extension slides from McFelly's for several projects. They're inexpensive and work well.

Re: Sharpening station progress.....

#11

Moses Yoder

Re: Sharpening station progress.....

Moses Yoder

We hardly ever use side mount slides any more, but when we do they are Knape & Vogt 8505. Part of the reason why is because Accuride is a bully. I can get you the 22" slides shipped to your house for around $20 per set, something I can only offer to friends. The Blum 75 pound undermount soft close is a nice slide which I could get you for about the same price.

If you go for the granite top, you would only be doing it once in your lifetime, and you would get a little thrill every time you used it. I used 1/2" thick 12" x 12" granite tiles on my sharpening bench, considerably less expensive, which may be an alternative for you.

Re: Sharpening station progress.....

#12

Re: Sharpening station progress.....

roger lance

Hey Moses....how you been??....thats very generous of you on the undermounts....perhaps on another project....I'd like to use Knapp and Vogt (as K&V is a Grand Rapids firm....don't know where they make the slides though)....will be using 18" full extensions....Menard's carries K&V but their prices are much higher on them than either Accuride or the LV slide....you're right about the cost of a granite top being a once in a lifetime expense and at my age, I need all the thrills I can get!!....so I'll keep looking into granite....still have some time before I'm ready for a top....good talking with you....take care.

Re: Sharpening station progress.....

#13

Re: Sharpening station progress.....

roger lance

Bruce....I did buy the Accuride full extension slides from Woodcraft....they are on sale at 20% off through 3/30....they seemed heavier than the slides at Home Depot which were less expensive.