New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

I screwed up.

Posts

Re: I screwed up.

#26

Another approach ....

david worrell

If you can live with using round dogs and really don't want to cut into the side of your bench, another approach would be to use a template to rout circles large enough to encompass the current dog holes and replace the removed material with a very large dowel with the same depth as your bench that has a circular hole in it for the round dogs.

Re: I screwed up.

#27

Re: A philosophical moment ....

TomD

If you feed the bit in the right direction the cut will keep it seated to the fence. If the router spins clockwise viewed from the top, you want to feed it left to right. The downside is increased possibility of tear-out, which is an additional reason to pre-cut with a saw.

Re: I screwed up.

#28

Re: I screwed up.

James Watriss

Typically when I have to ask that kind of question, I already know the answer.

Thinking about how hard it's going to be will only make it worse.