New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Dovetail joints using jig/fixture *LINK*

Posts

Dovetail joints using jig/fixture *LINK*

#1

James Pickering

Dovetail joints using jig/fixture *LINK*

James Pickering

The linked web page shows the jig/fixture and its use together with photos of finished dovetail joints. Here is the preamble to that page:

By 2010 I had not made any dovetail joints using hand tools for many years -- the time came to do so once again for I intended to make some small wooden boxes. I couldn't use power tools if I wanted to -- we live in a townhome community where the units are very close to each other and loud noises of any kind are much frowned upon. A few practice joints brought home to me just how difficult it had become for me to follow joinery layout lines on wood. I could no longer comfortably crouch or bend down to eyeball the way the saw blade was following the lines and my eyesight was poor even when wearing glasses.

There was something else: I had just undergone surgery for what was supposed to be a routine out-patient umbilical hernia fix, but the (three day) rehab for that was interrupted when I developed a high fever. A second emergency surgery revealed that my lower intestine had been clipped during the original surgery and I developed massive infections (peritonitis). At least I got to celebrate my eighty-first birthday with a hospital room party! The recuperation from the follow-up surgery required me to be tethered to a wound vac machine for six months with limited mobility which in turn severely curtailed my woodworking activities. I felt the need for some kind of assistive device that would enable me to cut very precisely to those layout lines despite my physical limitations.


Making dovetail joints using jig/fixture

Re: Dovetail joints using jig/fixture *LINK*

#2

Re: Dovetail joints using jig/fixture

roger lance

James....I have no experience with this device/technique but, I noted that it was from Lee Valley and things usually don't get any better from just about anybody than from Lee Valley/Veritas. Glad to hear you are doing much better medically and have that experience behind you....I think this product might be a good solution for you.

Re: Dovetail joints using jig/fixture *LINK*

#3

you're an inspiration

Jerry Gibbs

It would be so easy to sit around and get depressed.

Re: Dovetail joints using jig/fixture *LINK*

#4

James Pickering

Re: Dovetail joints using jig/fixture

James Pickering

roger lance wrote:

>>>

James....I have no experience with this device/technique but, I noted that it was from Lee Valley and things usually don't get any better from just about anybody than from Lee Valley/Veritas.

<<<

Agreed.

>>>

Glad to hear you are doing much better medically and have that experience behind you....I think this product might be a good solution for you.

<<<

Thank you for the kind thoughts, Roger.

James

Re: Dovetail joints using jig/fixture *LINK*

#5

James Pickering

Re: you're an inspiration

James Pickering

Jerry Gibbs wrote:

>>>

It would be so easy to sit around and get depressed.

<<<

Fortunately that is not in my nature, Jerry -- thank you.

James

Re: Dovetail joints using jig/fixture *LINK*

#6

Re: Dovetail joints using jig/fixture

Guillaume Dery

I second the inspiration comment!

81 years old, still actively woodworking, recovering from surgery... wow. Woodworking is all about overcoming problems to accomplish result. You are just taking that to the next level with how you are now doing dovetails.

My route was reverse from yours. I started off with power tools, then needed to do dovetails by hand but wanted aesthetic and tight-fitting joints. I used that jig for about 2 years before I felt comfortable losing the training wheels (what can I say, I am a slow learner). It works great and will do exactly what you want it to do. BTW, I second your using a different saw. The saw that LV sells to use with that jig is inexpensive but far from a joy to use.

Colour me a bit awestruck by you now.

Guillaume

Note to self: stop grumbling about my aging joints and get the job done, just like James!

Re: Dovetail joints using jig/fixture *LINK*

#7

Re: Dovetail joints using jig/fixture

Guillaume Dery

Oh, I forgot to add that at 81, you seem to be more tech-savvy than me, an ex-IT professional.... Really... wow

Re: Dovetail joints using jig/fixture *LINK*

#8

James Pickering

Re: Dovetail joints using jig/fixture

James Pickering

Thank you for those kind words, Guillaume. You wrote:

>>>

81 years old, still actively woodworking, recovering from surgery ........

<<<

Actually I am 83 now and well recovered -- and much enjoying woodworking using my hand tools.

James