New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Late 1940s woodworking hand tool kit

Posts

Late 1940s woodworking hand tool kit

#1

James Pickering

Late 1940s woodworking hand tool kit

James Pickering

Greetings to everyone -- this is my first post here.

Nostalgia is overcoming me in my dotage as can be seen by my first contribution:

Most of the tools I have painstakingly sought out and purchased from various sources in an attempt to re-create (as best I can) the various woodworking and tool kits that I used when I was an apprentice Truck Cab and Body builder at the firm of Oswald Tiilotson, Burnley, Lancashire (northern England) in the late 1940s. The tools depicted here are the type and vintage I used during my apprenticeship -- and in the same general condition -- well used but also well cared for. I derive great satisfaction from using tools that still function well after so many years of constant use. For me its really all about nostalgia and affection.

My tool kits evolved during my apprenticeship from a few used old tools (mostly pre-WWII 1930s vintage) when I started, to a mix of used and newly bought tools by 1950. The tool kit depicted here is representative of one of mine from about 1949.

Some of my Stanley tools were of US manufacture while others (post 1938) were produced at their British (Sheffield) plant. I personally preferred Stanley metal bodied planes - some craftsmen and apprentices preferred British made Record (and other make) metal bodied planes. I also mostly used Stanley bench (butt and paring) chisels, but generally preferred British made (mostly Marples, Sorby and Butcher) firmer, sash mortise and heavy duty mortise chisels. I eventually exclusively used North Bros. (Philadelphia manufacture) ratchet mechanism tools: rapid return spiral screwdrivers, hand drills and bit braces.



Three drawer tool box with top well/lid

Top well compartment:




* Smoothing Plane - Stanley Bailey No. 4.

* Bit Brace - North Bros. "YANKEE" No. 2100 (12" sweep).

* Hand Drill - North Bros. "YANKEE" No. 1530A.

* Low Angle Block Plane - Stanley No. 60½.

* Finishing Block Plane - Stanley No. 203.

Top Drawer:




* Paring Chisel - Stanley tang No. 161.

* Butt Chisel - Stanley No. 60 Stanloid handle.

* Butt Chisel - Stanley No. 40 Everlasting wood handle.

* Pocket/Butt Chisels - Stanley No. R40 hard rubber handle (3).

* Butt chisels - Stanley No. 750 - an assortment (5).

Middle Drawer:




* Spiral Ratchet Quick Return Screw Driver - North Bros. "YANKEE" No. 130A Medium Pattern.

* Claw Nail Hammer - Stanley No. 53 (7 oz).

* Claw Nail Hammer - Stanley No. 51½ (16 oz).

* Nail Set - Stanley No. 11.

* Screw Wax (or home made tallow box) - FastCap.

* Spiral Ratchet Quick Return Screw Driver - North Bros. "YANKEE" No. 131A Heavy Pattern.

Bottom Drawer:




* Oil Stone - Norton boxed, medium/fine.

* Hand Saw Sharpening Jointer - Disston.

* Hand Saw Tooth Set - E. C. Stearn.

* Marking Gauge - Stanley beech wood No. 61.

* Dividers/Compass - Microbow.

* Boxwood Folding Rule - Stanley 24" No. 61 or No. 62.

* Bevel - Stanley No. 25 (6").

* Try Square - Stanley No. 2 (8").

Hand Saws not in my Tool Box but part of my kit. (hanging on adjacent wall).




* Cross-cut Hand Saw - Disston D-8 (8 tpi).




* Tenon/Dovetail Saw - Disston No. 4 (18 tpi).

Tote for storing additional tools and for carrying specific tools to job sites. (kept on bench next to tool box).




* Mallet - Crown (or home made) 16 oz.

* Mortise marking gauge - Marples rosewood No. 2154.

* Heavy duty mortise chisel(s) - W. & S. Butcher.

* Sash mortise chisel(s) - Sorby "Kangaroo brand" boxwood handles.

* Firmer chisel(s) - Stanley No. 720.

* Miscellaneous small tools/accessories such as small clamps, spokeshaves, rasps, gouges, brad awls, wrenches, screwdriver bits, drill bits, pencils, sand paper & sanding block, sweeping brush, etc.

Sash mortise and firmer chisels were actually kept in a canvas chisel roll.

Addendum

Specialized Tools

As a general rule, apprentices didn't own specialized tools such as Rabbet, Dado, Router and Scraper Planes or Breast Drills, etc. - instead, they borrowed them when needed from the older craftsmen who were always forthcoming.

Other tools such as Gouges, Spokeshaves, Keyhole Saws, etc. of various makes were obtained whenever the opportunity presented itself, in the meantime being borrowed from older craftsmen as the occasion for their use arose.




Here are three tools often borrowed -- I eventually bought my own much later:

* Ratchet Breast Drill - North Bros. "YANKEE" No. 1555.

* Router Plane - Stanley open throat No. 71.

* Duplex Rabbet Plane - Stanley No. 78.

James

Re: Late 1940s woodworking hand tool kit

#2

Stephen Shepherd

Nice period tool kit.


Re: Late 1940s woodworking hand tool kit

#3

Re: Late 1940s woodworking hand tool kit

Pam Niedermayer

What did you use chisels for in the truck cabs and bodies? Were they wooden framed?

Pam

Re: Late 1940s woodworking hand tool kit

#4

Jim DeLaney, Austintown, Ohio

Re: Late 1940s woodworking hand tool kit

Jim DeLaney, Austintown, Ohio

Interesting that you included a saw setting tool, but not any saw files.

Beautiful set of tools, btw.

Re: Late 1940s woodworking hand tool kit

#5

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

Hi Pam.

Cabs and Flat Bed Bodies were hand built of wood at that time, the cabs being finished with sheet metal (van and panel truck bodies were just starting to be built using extruded aluminum sections and sheeting). I worked mostly in the cab shop doing framework joining and door making/installing, although I occasionally built wooden flat bed truck bodies (always under the watchful eyes and guidance of senior craftsmen) as did all apprentices, from time to time. Apprentices were rotated between various craftsmen for varying lengths of time by the shop foreman in order to learn all the different skills and processes.

James

Re: Late 1940s woodworking hand tool kit

#6

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

Hi Jim. You wrote:

"Interesting that you included a saw setting tool, but not any saw files. "

That is because I forgot too, Jim -- forgetfulness being one of the curses of old age.

Forgive me:

"There are three sure signs of growing old. The first is loss of memory -- I have forgotten the other two!"

James

Re: Late 1940s woodworking hand tool kit

#7

Re: Late 1940s woodworking hand tool kit

Pam Niedermayer

Thanks, James. Your tool kit seems really nice; although I don't share your love of Stanley planes, probably something to do with the age of the pre-WWII versions available.

Welcome to Woodcentral,

Pam

Re: Late 1940s woodworking hand tool kit

#8

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

Thank you, Pam. Yes, in my experience woodworking hand tool preference (love of .....) is sometimes based on factors other than practicality and performance. :)

James

Re: Late 1940s woodworking hand tool kit

#9

Re: Late 1940s woodworking hand tool kit

Pam Niedermayer

Oh, my preferences about Stanley planes is definitely based on performance, or lack thereof. I hate them. :)

Pam

Re: Late 1940s woodworking hand tool kit

#10

Re: Late 1940s woodworking hand tool kit

Guillaume Dery

Nice kit! You can certainly accomplish a lot with what you have and it wouldn't need many additions to tackle furniture building.

It is amazing how little tools you really need. Specially when you are organized like you seem to be. My kit is more of a haphazard collection of what I needed at the moment/whim/I feel for some gimmicky marketing/duplicate because I misplaced something else/I actually needed this core tool.

From one relative WoodCentral newbie to another, welcome home.

Cheers,

Guillaume in Ottawa

Re: Late 1940s woodworking hand tool kit

#11

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

Thank you for the warm welcome, Guillaume.

James

Re: Late 1940s woodworking hand tool kit

#12

Re: Late 1940s woodworking hand tool kit

Michael Brady

James is too modest. He actually has a very nice web page that features details of his reconstructed work tool set and some type studies, all nicely photographed. I'm not sure links are allowed here, so I will let James post it if he wishes. His is the only case I know of where a vintage tool user has web-chronicled his experience from the time when the tools were new.

Re: Late 1940s woodworking hand tool kit

#13

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

Hi, Mike -- thank you for the kind words. You wrote:

>>>

.......... He actually has a very nice web page that features details of his reconstructed work tool set and some type studies, all nicely photographed. I'm not sure links are allowed here, so I will let James post it if he wishes .........

<<<

I am in the process of re-writing the home page (which I think was too wordy, out of date and complicated to maintain) and updating the type studies (all strictly non-commercial). I will post a link when the project is complete.

James

Re: Late 1940s woodworking hand tool kit

#14

James Pickering

Re: Late 1940s woodworking hand tool kit

James Pickering

I wrote:

>>>

.......... I am in the process of re-writing the home page (which I think was too wordy, out of date and complicated to maintain) and updating the type studies (all strictly non-commercial). I will post a link when the project is complete.

<<<

It is finished and available at: http://jp29.org/wwtools.htm

James