New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Benches: one change leads to another.

Posts

Re: Benches: one change leads to another.

#26

Re: Bench

Warren in Lancaster, PA

My bench is nothing to shout about. In the fall of 1979 I moved from a rented place that had a workbench in the barn and needed to make something. I talked to a sawyer about some heavy beech for a Roubo bench. He said he had a big beech up on the hill, but I was not sure when he would get to it. Daniel O'Hagan gave me a 2 3/8 dogwood bench screw that he turned on his pole lathe.

I had some 2 inch oak planks and I bought some heavier oak for legs at a junk yard, and decided on an early 19th century Pennsylvania design. Three planks for the top, a 3 inch apron under the top at the front for rigidity, slanted leg vise, bench stop, sliding deadman, low shelf on the stretchers. It is adequate but nothing great. $13 invested in materials.

Re: Benches: one change leads to another.

#27

Daniel O'Hagan

Kevin Adams

Thanks, Warren, very interesting as usual. Did you know Daniel O'Hagen well? Ever do any work with him? I have always heard that he was a real gentleman in the true sense and very generous as a teacher to countless woodworkers.

Take care,

Kevin

Re: Benches: one change leads to another.

#28

Re: Bench height

Pam Niedermayer

This is one of the reasons my height/angle adjustable planing beam attached to my bench is so valuable. It's adjustable to a height as low as my bench top.

Pam

Re: Benches: one change leads to another.

#29

Re: Daniel O'Hagan

Warren in Lancaster, PA

Yes I knew Daniel (1923-2000) and his family well. He was a long time hand woodworker, doing research and recreating the craft from 60 years ago. His craft was rather different from mine- he more interested in carpentry, joinery, Windsor chairs, and I more interested in cabinet making. A neighbor once told me he had asked Daniel about me and he said "Warren works wood like a machinist works steel". I did not learn much of woodworking from him, but I did adopt his mortising technique in 1978 and still use it. Also he was my first pitsaw partner.

Re: Benches: one change leads to another.

#30

Re: Daniel O'Hagan

Kevin Adams

I never had the good fortune to meet Daniel, but I knew that he taught down at Drew Langsner's quite a few years ago (probably about when you picked up his mortising technique). I recall seeing a photo of him rather late in life riving some wood for sheep hurdles. I believe Peter Follansbee is one who counts Daniel as an early mentor.

Warren, I really hope you are writing all of your experiences down somewhere. In all seriousness, you should think about doing a book or perhaps collaborating with someone on one. I don't know how that sounds to you, but I know there are many like me who would enjoy reading it.

Thanks.

Kevin