New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

How do you like to store your hand planes?

Posts

How do you like to store your hand planes?

#1

How do you like to store your hand planes?

Joe in a Cleveland suburb

Hello.

I have a cabinet I built a number of years ago from scrap 2bywhatevers. It worked out pretty nice. It was based on an article in FWW Mike Dunbar did. It was just something to do and a way to play with hand tools, hand cut some DT's, use cut nails, and use up scraps destined to the fire pit.

I've always liked it and put my 'special' tools in it like my planes and chisels. There are two things about it I don't like though. It sits on the floor and is waist high. To get to my chisels, I have to squat down on the floor (knees complain). Second, it has shelves the planes sit on (on their soles) and I'm not too sure that is best.

In addition to that, it has become too small for my massive (not) collection of planes and chisels.

I would kinda like to build a wall hanging unit but my options are very limited for hanging something on the basement wall; the basement was waterproofed by a previous owner. The walls are covered with heavy plastic sheets (that are not removable) and I can not see what is behind them.

I am curious to see or read about how you store your hand planes.

Thank you.

Re: How do you like to store your hand planes?

#2

Jim DeLaney, Austintown, Ohio

Re: How do you like to store your hand planes?

Jim DeLaney, Austintown, Ohio

Many of mine are in a cabinet, with shelves whose backs slant at about 10°. Some of the shorter planes are held in place with magnets embedded in the shelves.

The remaining 25 or so are either in a workbench drawer, or on a shelf that's suspended from the ceiling above my bench.


Re: How do you like to store your hand planes?

#3

Re: How do you like to store your hand planes?

Bill Houghton, Sebastopol, CA

I have a mechanic's rollaway chest with 2" deep drawers that are holding my chisels, spokeshaves, and rasps; and two 4" deep drawers, one of which holds the small planes. Larger planes (bench, bench-sized rabbets like a Stanley No. 78) are in cubbyholes under my workbench.

The drawers work better than the cubbyholes, mainly because the cubbyholes foster a two-layer approach that means planes not used regularly are harder to get to (For a given not-often-used plane, I have to first remember which plane it's behind, and then pull out that plane before I can get to it; since I have trouble with Step 1, I wind up pulling a lot of planes out).

On my round tuit list is a wooden cabinet of drawers, with drawers deep enough for bench and similarly-sized planes, plus plenty of shallower drawers for smaller planes, chisels, layout tools, etc.

A wall cabinet would not work out in my shoplet, because it's too small; I need to store things in a compact way.

Re: How do you like to store your hand planes?

#4

Seriously cool !!!


Re: How do you like to store your hand planes?

#5

Re: How do you like to store your hand planes?

Christopher Fitch Memphis

In a wall cabinet...

I agonized over building it. It could be better but it works well enough for me.


img

Re: How do you like to store your hand planes?

#6

Wood?

Tony - Memphis

So, where are you getting your lumber these days? I sure miss Colco and the place in Collierville. I've been mail ordering, but I'd much rather pick my own and not pay shipping. We may take a trip to Atlanta this spring, so I plan on hitting wood places there. Can't haul it back, but maybe they will ship.

Tony

Re: How do you like to store your hand planes?

#7

craigd

Re: How do you like to store your hand planes?

craigd

The planes are easy to grab and, as my "working set" is, uh, dynamic, it is easy to swap out planes.


Re: How do you like to store your hand planes?

#9

Re: How do you like to store your hand planes?

david weaver

The ones I'm using at the time are in the shop on a rack close to the bench.

The ones I'm not using are in my basement (which is a very dry basement) where they have less temperature variation and much less chance of rusting.

They're on those plastic storage things you get at home depot. From time to time, I'll get a little rust on something in there, but not much.

Re: How do you like to store your hand planes?

#10

Re: Wood?

Christopher Fitch Memphis

No where right now...only things I've built recently have been from pine so I wander over to Lowe's or Home Depot and pick some up.

What happened to Colco? I heard they closed but I went over around 6? months ago and they were still open.

I used to buy everything from That Wood Joint (Jerry) but he went out of business. He had the best prices and a great selection. I still have about 40 bd ft. of Cherry on the lumber rack along with some walnut.

Only other place I know of is the Woodwork Shop. They had a change of ownership some time ago and became a Rockler Affiliate.

http://www.thewoodworkshopinc.com/

They do have some lumber and you can get them to order more but I'm not aware of anything else.

Re: How do you like to store your hand planes?

#11

answer to wood

Bill Tindall

Everywhere has some source of truck delivered hardwood at something between wholesale and retail prices. This source is what delivers lumber the the local cabinet shops and other users of 100 to 500 bdft quantities of lumber. The down side is that you will be buying by grade, but at least the grade will not have been picked over by who ever got there before you.

I am an advocate of buying a pack(about 500 bdft) of what ever lumber you intend to mostly use. The advantages are numerous, presuming you have the space. Historically, hardwood lumber has been an outstanding investment. A glance at our old price lists confirms that story.

Re: How do you like to store your hand planes?

#12

PS

Bill Tindall

I just noticed you are in a large city. There will be numerous places that cater to the shops in a city of that size. They will be as happy to deliver lumber from their delivery truck to your shop as they are to any other shop but the quantity will have to be something they can make a profit delivering, likely a hundred feet or so.

Re: How do you like to store your hand planes?

#13

Question

Bill Tindall

What are the tee shaped small tools in the upper left?

Re: How do you like to store your hand planes?

#14

Planes on wood

McKay

You said; "Second, it has shelves the planes sit on (on their soles) and I'm not too sure that is best. "

If you set your plane on a piece of wood to plane it, and it is properly lubed, what difference does it make if it sits on a shelf or angled? If it is behind a door that would keep the air borne stuff off of it I would guess that this would be best.

Re: How do you like to store your hand planes?

#15

I'm not Jim, but...

Bill Houghton, Sebastopol, CA

from here they resemble the fences, and fence rods, for planes like the Stanley No. 78 or No. 289 rabbet planes.

Re: How do you like to store your hand planes?

#16

Jim DeLaney, Austintown, Ohio

Re: Question

Jim DeLaney, Austintown, Ohio

Bill H. got it right. They're the fences for the rabbet planes.

Re: How do you like to store your hand planes?

#17

In cabinets ...

Derek Cohen (in Perth, Australia)

I like to keep the bench planes close to the bench for two reasons. Firstly, they are within easy reach when I need one and, secondly, the cabinet is the only place I can rest them as my bench is tiny (a little under 5').


These are angled and hinged at the top. I store "stuff" behind the planes as well.


This weekend I start on a new bench!

I have planes in other cabinets. These are specialist planes: routers, shoulder, rebates, etc ...

Pictures of my woodshop here: http://www.inthewoodshop.com/Furniture/ImagesOfMyWoodshop.html

All in the protection under the ever-alert, eagle eye of Aura ...


Regards from Perth

Derek

Re: How do you like to store your hand planes?

#18

Re: answer to wood

TomD

There are a bunch of points there, and +1 on all of them. I bought tons of maple when it was cheap. Price has come down a little from the peak, but is still many times more than I paid for it. If you can store it somehow get it in commercial quantities.

Re: How do you like to store your hand planes?

#19

Re: How do you like to store your hand planes?

TomD

For the most part I prefer open display vs. cabinets. I'm talking here about tool cabinets. If one has space a kitchen type cabinet set-up can be good general shop storage.

I find a lot of the fancy set-ups seem to be for Stanley type planes. I really don't like those planes much. They are fine, but I can think of a half dozen or more styles I would choose first. The advantage these planes have for storage, is that they are a relatively finite series. They have low CGs that hold on those ramp set-ups.

My planes are a little more variable in size and shape. I have molding planes that go on shelves. Once the Beech dries this could be my largest selection and I will need a lot more shelves. The upside is they are not in constant use. Those that are are on horizontal pegs, sorta like Craig's system. I like pegs because they don't collect dust. I haven't got the look right yet, though. One rack I have some block planes on is a little flimsy, and another is a little Flintstony. I also store some under the bench, the longer ones span the rails. My bench doesn't move around so they don't fall off. I have quite a few in a general storage cabinet. These are mostly the metal ones I don't use so much.

The easiest to store are the Japanese ones I have a rack for where the blade hooks over a cleat, and the plane is against a board facing the ceiling.

Re: How do you like to store your hand planes?

#20

Under the bench of course


Re: How do you like to store your hand planes?

#21

PORN!

Thomas Skaggs, Foothills of Mount Level

My goodness....that picture should have staple marks in the middle! ;-)

T.

Re: How do you like to store your hand planes?

#22

Re: How do you like to store your hand planes?

James Watriss

I keep mine in a drawer. The chest to the right of the bench has a 5 drawers, the bottom drawer is very deep. I put my planes in there, on their soles. I don't have any issues with doing it that way, and I can't conceive of why someone would.

If you're tired of crouching, make a stand for the cabinet. It can make for a fun drawboring exercise, and when you're done with that, you can fill that with drawers... (I'm planning to fill the stand for my tool chest with drawers sometime soon.)

And if the collection of planes is outgrowing your cabinet, well...

How many of those planes do you really use? I'm finally down to 3 or 4 bench planes that get regular, active use, plus a block plane and a few specialty planes. And I'm starting to find myself getting rid of some of the old Stanleys, simply because I have others with pitches at 48, 50, or 55 degrees, and they work better on the woods that I use. It's not that the Stanleys don't work well, it's just that the others work better.

Looking at the Studley chest, I only see 7 hand planes, including the #1 and the finger plane.

The other reason I started cutting down... it was getting to the point where I was having to sharpen too many tools, and I decided that enough was enough. I want to produce more and sharpen less. And I do a better job of sharpening one tool at a time, as opposed to batching piles of them.

Now that I almost have my plane situation worked out, I think it's going to be time to focus on figuring out my pile of chisels next. At last count, I have 4 pigsticker mortise chisels, 6 Swiss Made bench chisels, One Japanese mortise chisel, and 22 Japanese bench chisels. This includes 4 different 3/4" chisels (or the metric equivalent), so the lesser of the 4 gets treated like a stepchild. And while a 3/4" Iyoroi/ Ice Bear chisel makes a really good glue scraper, that doesn't really make it right. I recently blew out a 1" band saw blade on my Laguna... that was an exciting moment... and I think I'd feel better about making some of that into scrapers instead, and cleaning up the Iyoroi.

A good friend introduced me to what he calls the zen of collecting. He told me that the starting point is to gather together a collection of things. For him, it's old typewriters. Gather them together, compare them, and learn whatever you can from the differences. Then, find the ones that really excite you, and send the rest back out into the world, so that they may eventually find their way to a useful and fulfilling existence.

I know that for some folks, collecting is more like the mantra for cereal box prizes... collect all 12! And if that makes you happy, then hey, cool. For myself, I'm trying to move towards more work and fewer tools.


img

Re: How do you like to store your hand planes?

#23

Redundancy is the spice of Life

James Watriss

Redundancy is the spice of Life.

Redundancy is the spice of Life.

Redundancy is the spice of Life.

Ye Gads, man, that's a lot of iron!

So, which one is your favorite?

Re: How do you like to store your hand planes?

#24

What do you mean, James?

Bill Houghton, Sebastopol, CA

I count just one drawknife...

Bill, who's not about to put up a picture of my plane/spokeshave/drawknife assemblage, for fear that my sweetie would walk out to the yard in the course of my picture-taking (the camera won't back up far enough in my shoplet to take them all in, so I'd have to lay stuff out on the picnic table)

Re: How do you like to store your hand planes?

#25

I see that chair...

Joe Shelton

...and if that's your work, then your approach is compelling.

But I'm still not gonna rid myself of my redundancies.

And I hope someday to have a chair like yours to my credit. Nice.

Joe