New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Update on chests: halfblind dovetails in Jarrah

Posts

Re: Update on chests: halfblind dovetails in Jarrah

#26

Another reason for the lower back

Andrew F in Australia

..is to provide clearance for things that get jammed in the drawer as you open it.

If the back is full-height, then it catches things and jams the drawer part-open or wrecks whatever has shifted as it crushes it between the back of the drawer and the upper drawer rail when you open the drawer.

CHeers,

Andrew F

Re: Update on chests: halfblind dovetails in Jarrah

#27

Re: Still not clear...

Charles

He drove an old bandsaw blade in the sockets to assist with cleaning out the corners and to complete the diagonal sawcuts which, by definition, cannot get into the corners unless you over-run the lines severely. This is explained clearly in his old dovetailing video.

For those using a regular western dovetail saw a stiff card scraper is about the right thickness for this technique. It works and it does save some fiddly paring back into the corners and obviates the need for primping around with skewed chisels.

Watch the video.

Re: Update on chests: halfblind dovetails in Jarrah

#28

Re: Tradition as well

Charles

Excellent stuff. Very helpful.