New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

How do you all "soften" edges?

Posts

How do you all "soften" edges?

#1

How do you all "soften" edges?

Bill Tindall

There are a lot of edges on 7 drawers and I like to soften them all. I don't like touching a sharp edge in furniture. I've tried block plane, spoke shave, sand paper. Yet another one of those things I have not settled and await sage advice.

Re: How do you all "soften" edges?

#2

100 grit on a wood block....

roger lance

like you said a lot of edges....one of those unenjoyable time consuming tasks that make a world of difference.

Re: How do you all "soften" edges?

#3

Block plane

Bill Houghton, Sebastopol, CA

Usually - although it depends on my mood - a Stanley 60-1/2. While this is theoretically for end grain, for the tiny chamfer involved, it makes no real difference. The 60-1/2 fits nicely in the hand.

Re: How do you all "soften" edges?

#4

Ditto

Bruce, a MN Galoot

that was one of the first things I learned to do, many years ago. Call it intro to block planing, 101.

Re: How do you all "soften" edges?

#5

A worn piece of 220 folded into thirds 


Re: How do you all "soften" edges?

#6

Re: A worn piece of 220 folded into thirds

Pam Niedermayer

That's pretty much my solution, too, but folded in two rather than thirds.

Pam

Re: How do you all "soften" edges?

#7

Re: Files

TomD

It depends on the edge one wants, I have used everything from a 1.5" radius roundover router bit, to 7" disc grinder. But most comonly I might shoot an edge with a block plane, then get in there with a file. I always liked the look of Krenov's edges, and I wondered what he used that would match up with the hand planes he states a repference for for the faces. Answer is files.

Re: How do you all "soften" edges?

#8

thanks

Bill Tindall

Don't know why that approach didn't cross my mind.

Re: How do you all "soften" edges?

#9

tried file, works great

Bill Tindall

Like all things hand tool, sharp is essential. A sharp file is a must or fuzzy edges will result with my usual collection of dull files.

Re: How do you all "soften" edges?

#10

Don't know how sage, but you might add a little at

Ron Bauman

When I worked as a machinist a thousand years ago there was always a little note on the blueprint "break all edges". I now do it with a chamfer plane. I use a Japanese plane I've had for 30 years. Its a look I like and it saves me and my customers paper cuts. It might be a bit severe for your purpose, but just a thought.

Re: How do you all "soften" edges?

#11

Re: tried file, works great

TomD

Glad you like it!

A more boutique thing that also keeps up with the polish off a plane is to use a burnisher. I use the one LV sell for scrapers, because it's there. This isn't going to work for everything, but it is very effective. It shines the wood up; it can do facets; it is very fast; not messy; and it will not tear out; though it can break over. Obviously not going to give you a massive chamfer. I use it for special situation, and small parts. I discovered this myself.

Re: How do you all "soften" edges?

#12

Re: How do you all "soften" edges?

Charles

Fine cut file then a rub down with burlap. Unbeatable.