New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Tool Chest

Posts

Tool Chest

#1

Tool Chest

Todd Nebel

Let me begin by saying I almost never do any woodworking during the summer. For one it's too hot in my basement workshop and two I much prefer riding the Harley when the weather is good. And there you have it, the weather has not been cooperative this summer. Another factor was I came across a little curly cherry and was itching to use it. So, on a rainy day I was flipping through some older issues of FWW and saw this article from Chris Gochnour - Heirloom Tool Chest. It was a perfect project to take my time and practice my hand tool skills. Other than ripping (bandsaw) the boards to near width and planing (power planer) to near thickness, everything was by hand. Finish preparation was from smoothing plane or card scraper. The only use of sandpaper was to soften the edges.


I installed the hardware today and loaded it up with a bunch of stuff. I've never worked from a tool chest before. Up until about a year ago I was primarily a power tool woodworker. Hand tools were only used to fine tune my joinery. So, it will take a few hand tool projects to work out what I will keep in the tool chest and what will be returned to the wall cabinet above the bench and in the cabinet drawers here and there in the shop. Hopefully this will be itself a useful tool in the shop.





Thanks,

Todd

Re: Tool Chest

#4

Re: Tool Chest

roger lance

Todd....Beautiful tool chest....the wood choice is spectacular....you've built a real heirloom....I've read a few things on using Tried & True on cherry by Christian Beecksvoort and on oil finishes by Thomas Mosher where they heat the finish to about 135 - 140 degrees before applying....they talk about a greater penetration into the wood with an oil finish by doing this....perhaps heating has some additional effect on drying as well ??....for a self confessed power tool guy, you've got a great collection of hand tools going....and glimpses of your bench also suggest that you made that as well....how about a shop tour ?? or pictures of that bench ??....both would be a treat !!

Re: Tool Chest

#5

Re: Tool Chest

wilbur

That is awesome! Fantastic job!

Re: Tool Chest

#6

Shop Tour

Todd Nebel

Hi Roger, you caught me at a good time for a shop tour request. After finishing this tool chest I decided to re-arrange the shop to better facilitate my hand tool woodworking. The shop is usually this clean because after every project I clean it. It's a must since it's in the basement and I need to pass through it to get to my office. I moved the bench out and away from the wall. It was previously under the wall cabinet. I built this bench in 2000. I thought it was great finding these deals on wood that was sitting in a Pennsylvania barn for years and paying next to nothing. Well, you usually get what you pay for. The whole lot of hickory wasn't furniture quality, not that I've ever seen furniture made out of hickory. So, it was used for the bench. Boy, this is a heavy bench so that's good. The top is a solid 3" thick. I guess you would call this a power tool woodworkers bench because it's really much to tall, only has the one vise and is limited on the bench dog wholes. I will have to modify it soon or sell and build a new one. The first picture is the hand tool area of the shop. It's about 1/3 the size of the shop. That's my latest project on the bench, started and finished this past Sunday, T&T finish drying on it. It's a saw bench made out of walnut crotch. There's a story there for later.

Before...


After...


This next shot is the other 2/3's of the shop. It's the power tool and wood storage area of the shop.


Starting on the left and going around the room; here's the Powermatic gang. The mortiser and drill press are on wheels and can be moved. I need to get wheels for the bandsaw.


Next, is the dust collector, sanding drum, thickness planer, and a storage cabinet for the power and air hand tools. I'm fortunate to have a window on this wall. All my non-sheet lumber comes in through it.


Then there's the wood storage rack on wheels. That was a good idea at the time. It's never moved, not that I could ever move it loaded or have anywhere to move it to. The bins have cutoffs sorted by cherry, walnut, maple, and white oat. These are my typical project woods. I use the cutoffs for smaller projects on the lathe or accent pieces. I also have the table saw over here with a dust collector shared between it and the lathe.


The last shot is of the lathe on the stand I designed and built for it, the air compressor and the roll around clamp rack.


Well, I hope you enjoyed the shop tour. Let me know if there's anything more interesting than another that you would like to have a better picture of or description.

Thanks,

Todd

Re: Tool Chest

#7

I appreciate how much you must suffer!

Bruce, a MN Galoot

That's a nicely organized space. Don't your hand and power tools like to mingle? Mine migrate like the dickens. My table saw in particular thinks it's just another flat, level surface designed to keep stuff off the floor.

In my next house, I am thinking of a basement shop (if there is room) and wonder about things like the ability to get projects OUT of the shop. Has that been a problem for you?

Re: Tool Chest

#8

Thanks for the shop tour !

roger lance

Todd....I have a similar basement shop with one window that serves as my supply route for getting boards into the shop....convenient....and, yes you do have to plan about getting projects up and out (no boat building down there)....I've also got a PM 719A and love it as well....love the X-Y table, hold down, and the 1 hp....ooops, this IS hand tool land !!....great shop....thanks for the tour !!

Re: Tool Chest

#9

Project removal

Bill Tindall

Might be a problem if you are building boats. But anything called furniture needs to fit through 32" doors. I put 36" doors in the shop so the furniture is not dinged going through doors until it gets out of the shop.

BTW, our kitchen isn't that tidy.

Re: Tool Chest

#10

Re: Project removal

Bruce, a MN Galoot

I got dinged and my project got cut in half (literally) when the 6' X 6' bookcase I'd built in the garage couldn't get into our basement because it couldn't clear the header at the bottom of the stairs.

I should have had you out to see the state of constant disarray in my shop, Bill. Probably worse than your kitchn.

Re: Tool Chest

#11

I appreciate the realism

Bill Houghton, Sebastopol, CA

"...so the furniture is not dinged going through doors until it gets out of the shop."

Yes...not "doesn't get dinged," but "at least not until it's out of the shop." Patina begins to accumulate immediately after the last coat of finish goes on - in my case, sometimes earlier.

Re: Tool Chest

#12

Re: I appreciate how much you must suffer!

Todd Nebel

Hi Bruce,

Sure they mingle, the ruler makes it's way into the power tool area and the biscuit jointer visits the bench on occassion :) The tablesaw sees double duty as a work surface/tool holder when I'm at the lathe. When we bought into this development several years back I was one of the few who didn't have the basement finished by the builder. One because I wanted to carve out a space for my woodworking shop and two, well lets say the taxes are higher enough around here. So, I just paid the builder to drop in extra outlets. I sized the door opening to the shop the same as the door opening to the basement stairs (and the rest of the interior rooms). As long as I make sure it can leave the shop it can make it into any room in the house. That being said I have a nasty 90 degree turn up the basement stairs that requires thought on long or very tall pieces. So just plan ahead.

Todd

Re: Tool Chest

#13

neither is my kitchen

Todd Nebel

Re: Tool Chest

#14

Re: I appreciate the realism

Todd Nebel

I'm with you Bill. I tell my family it's as good as it gets when it leaves my shop. Now you decide how you want the piece to age. I put my shoes on the coffee table now and again. What's the sense of having a Stickley style piece of furniture if it looks brand new?

Re: Tool Chest

#15

Re: Tool Chest

Charles Jackson III

Nice chest! I might build one myself.

Re: Tool Chest

#16

Re: Shop Tour

Charles Jackson III

Nice looking shop!