New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Question about socket chisels

Posts

Re: Question about socket chisels

#26

Re: It seems to work for Joel

Pam Niedermayer - Austin, TX

It's not right or wrong, it's do you want to keep your fingers intact or not; and if the arises aren't sharp enough to cut your fingers, they're not sharp enough to help you cut the wood.

Pam

Re: Question about socket chisels

#27

Re: It seems to work for Joel

joel moskowitz

The blog entry, which I wrote nearly 2 years ago, isn't about how to hold a chisel, it exaggerates the position a little because I'm writing, among other things about the difference between tang and socket chisels.

When you grab a chisel like that your hands don't touch the sides at all.

However looking at the picture I would agree that I am holding the chisel way low. Aside from the exaggeration because of the topic, the main reason is my bench is a little low, my eyesite bad, and when I lean over to see what I am doing the comfortable position for my wrist is low down. Since then I have gotten a bench-on-bench (which I made a touch too high hah-hah) and my overall posture and positioning is better.

Re: Question about socket chisels

#28

Re: It seems to work for Joel

Pam Niedermayer - Austin, TX

OK, but still, first time I tried it some years ago I cut open my forefinger fairly severely in two areas, and didn't even notice it until blood had dripped all over the chisel and wood. And believe me, I didn't think I was holding the arises, but I was.

Pam

Re: Question about socket chisels

#29

Chisel coming off the socket

North of the Border

PWM (or Woodworking mag.?) published a tip of using hairspray to keep chisels tight in the sockets. I'd think spray adhesive would work, too.