New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Two Cherries chisel question

Posts

Two Cherries chisel question

#1

Two Cherries chisel question

Jerry Gibbs

Bought a set of chisels that were not polished. The box has instructions in German, including a diagram re honing both edges, which I knew before the purchase. What does it mean to polish the chisels? Are these chisels coated with anthing I am supposed to remove?

Re: Two Cherries chisel question

#2

alles geht mir in die runde

Joe Shelton

My Two Cherries didn't come with instructions or a box, so my experience may not help, but I think that polishing is a final stage of sharpening, not a cosmetic operation.

A well-prepared edge, whether a chisel or other tool, has two faces that meet each other in a regular arris, and both faces are shiny and smooth. To me, that shiny, smooth finish is the polish.

Und habe ich alles fergessen? Sagt mann "in" oder "en"?

Joe

Re: Two Cherries chisel question

#3

Re: Two Cherries chisel question

Steve Elliott

I'd guess that the instructions refer to final honing. Some chisels are coated with lacquer--which I don't like the look of--but it's gone from the important surfaces as soon as you do any sharpening.

Re: Two Cherries chisel question

#4

Re: Two Cherries chisel question

Bruce, a MN Galoot

I have a set of Hirsch chisels that are essentially identical to the Two Cherries. I say "essentially" because my chisels came polished. That means that the backs have been machine polished, and the side edges of the blades are dubbed over. While it's not a fatal problem, it is a bit annoying because the cutting edge will not extend all the way to the side until you have flattened the back enough to remove the dubbing. It'll happen over time, so not to worry. For the most part you won't even notice it. If you want to remove the lacquer coating, just let them sit in lacquer thinner or acetone for a bit.

BTW, they're good, general purpose chisels that can take a good whacking. I got mine on advice from Bill Tindall, and they've been a good purchase.

Re: Two Cherries chisel question

#5

Re: Two Cherries chisel question

Pam Niedermayer - Austin, TX

But you said your chisels were NOT polished; therefore, nothing to worry about.

Pam

Re: Two Cherries chisel question

#6

Re: Two Cherries chisel question

Derek Cohen (in Perth, Australia)

Hi Gerry

The comment may refer to one of two factors.

Firstly, most of the Two Cherries chisels sold are polished. This is purely to look good. But they stuff up the edges, dub/round them off, so that the edge no longer runs fully across the bevel. To make them usable as originally intended, the new buyer needs to lap the backs until the dubbing is removed. Many, many complaints from frustrated buyers. The steel has an excellent reputation, hence the reason they remain recommended (with a caution). Fortunately, yours appear to be some of the few "unpolished" versions, so they will be ready to go after ..

Number two ... polsihing here refers to honing the blade. The polish is the final part of the sharpening process.

Regards from Perth

Derek

Re: Two Cherries chisel question

#7

karl jr

Wahrsheinlich sollte man "in" sagen,

karl jr

aber Ich bin nicht sicher.

KTK