New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Morris chair questions...

Posts

Morris chair questions...

#1

Morris chair questions...

Scott Burr in Ben Lomond CA

I'm planning on build a chair based on this design.

For those of you who have built on or use one

How often do you adjust the back angle of the chair or is it left in one position most of the time?

If it's left in one position for most of the time witch position is it in?

Thanks!

Re: Morris chair questions...

#2

Re: Morris chair questions...

George in not so snowy Lowell, Mich.

Hi

I love mine, although it isn't a real "Morris chair". It was made by a company in Portland, Michigan, "Ramsey-Alton" back in the 20's or 30's I think. Mine stays at about 20* off vertical most of the time unless it is nap time then it goes back to about 40* off vert. I would suggest extra hinges along the bottom if that is the way your plans are because there is alot of pressure on them trying to be ripped apart when you lay back!!!!

The cushions in mine are quite firm and I have yet to hear anyone say anything but "Boy that is a comfortable chair!"

Work safe

George

Re: Morris chair questions...

#3

Re: Morris chair questions...

Michael Brady

I leave mine in the second most upright position all of the time. Funny how that chair gets taken first whenever a group of people is at the house. The chair is remarkably comforable, and those wide arms are very inviting after a long day. When I changed mine from upholstery to leather it made a big difference in my satisfaction, also.

Re: Morris chair questions...

#4

Morris Chair

R.J.Whelan

Scott,

We have two of these grand chairs.

My wife's chair has the back at -7 degrees and I don't remember ever seeing her change it.

Mine was pretty much permanently at -12 degrees until I hurt my back and had to spend several weeks sleeping (for at least half of the night) in the chair. It's now back in it's original orientation.

My wife prefers the wooden armrest. I changed mine to padded leather after about a year (fortunately I had leather left over from the seat and back - the wear and sun fading have pretty much equalized now).

The first Morris chair I built (for myself) was too wide in the seat (my idea of comfortable) and caused the arms to be slightly uncomfortable.

Good luck with your chair .......... rj

Re: Morris chair questions...

#5

David Barnett

You know...

David Barnett

...I never really thought of Morris chairs, until just now, as the sitting equivalent to the Sleep Number� bed.

Re: Morris chair questions...

#6

You know... Tempur-Pedic

Scott Burr in Ben Lomond CA

I have one and hate it!, gettin' out of it in the morning that is.

I've been pondering it as a cushion material. :D