New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Grade of cast iron for diamond sharpening?

Posts

Re: Grade of cast iron for diamond sharpening?

#26

Re: Dont do it.

Bob Hackett

My warning was geared toward the functional end of things.The likeness of Satan would act like a coke snorting ex-porn star,all the diamonds would immediately go right up the nose and be lost.I do agree that Chinese cast is cheap junk,just like most things imported to us from China.

I believe that laminated chisels regardless of origin were not made from laminating steel to cast iron.If it was iron you were laminating the steel to it would be wrought iron which is an entirely different animal than cast.You can easily forge weld wrought iron,I don`t know anyone who can effectively forge weld cast iron.

Apples and oranges.

Re: Grade of cast iron for diamond sharpening?

#27

Re: Dont do it.

TomD

Good point but would the iron in old blades be a poor choice? You know the stuff they made swords of.

Also, why is it that aluminum isn't used, it is softer to be sure, but no MDF, and really flat stuff is cheap. I mean it isn't dirt cheap after the last few years, but in the size in question...

Another material that would interest me is epoxy, some of it like WEST is very hard, it can be loaded with rock particles. In that form it is rapidly displacing cast iron in stability application, though it wouldn't make a good substitute for something like a cross-slide. There are products designed to replace critical bearing surfaces in machines... My thinking is to deal with the durometer issue by loading it with cabosil, so that for particles to really penetrate below the surface, they would encounter rock. So you get a composite result with three desirable properties. Sticky due to softness, flows out dead level, and can't be penetrated. A big advantage would be the ability to cast it into useful shapes, or machine it.

Re: Grade of cast iron for diamond sharpening?

#28

David Barnett

A very good idea, indeed.

David Barnett

"Another material that would interest me is epoxy, some of it like WEST is very hard, it can be loaded with rock particles."

Faceters have used composites of epoxy, pelletized metals and/or abrasives for years. The Crystallite Last Lap is an industry standard. Homemade epoxy laps are less known, but I've used resin coated master plates with embedded abrasive. Phenolic's good, too. Laps needn't always be hard, of course. Machining waxes are used for lapping softer gem materials. I sure do love my West System epoxies.

Re: Grade of cast iron for diamond sharpening?

#29

Re: Grade of cast iron for diamond sharpening?

les winter

I checked with Lee Valley and they do not have a spec on the flatness of the underside of their plates

Re: Grade of cast iron for diamond sharpening?

#30

Why the concern about the underside?

Bob Hackett

Re: Grade of cast iron for diamond sharpening?

#31

Re: Why the concern about the underside?

TomD

Because it is flat and would be ideal for the paste thing, if one didn't have a better source for a piece of iron. I suggested this a while back. They say it is machined, which should mean in the area of .001" Mills will do that all day long. Surface grinders can do better, they also create a different surface. The one I saw at LV seemed pretty polished on the sides, I couldn't see the bottom. I wouldn't hesitate to use it, but then I can return it to the store pretty easily.