Digital micrography - options for blade watching *LINK*
David Barnett
I'm all for looking at blade edges through microscopes, and those camera scopes are really very useful, whether home built or otherwise. One advantage is that you have a digital camera to begin with and don't need to match a separate digital camera to a non-camera microscope.
One thing to remember, though, and I'll try to keep this simple, is that there are two basic types of microscope: the compound microscope and the dissecting microscope.
The microscope you're looking at on Amazon is a compound microscrope intended mostly for biological work. It has a mirror underneath to transmit the light through an aperture, then through the sample, usually held on a slide.
As blades are opaque, light cannot be transmitted through them to the eye. Also, the field of view in these microscopes is very limited and the objective lenses are too close for thick samples. Now if you're intending to use this scope to explore what's in your water, thin sections of plant tissue or insect wings, this will do it. However, for looking at blade edges, not so much.
For that, you'll need reflected light, that is, light bounced off the surface of what you wish to see rather than through it. This is what's often called a dissecting microscope, and the most useful these days, outside the video camera microscopes, is the stereo microscope (not to be confused with the binocular compound microscope).
An example of this may be seen in this article:
http://en.wikipedia.org/wiki/Stereo_microscope
Notice that this microscope has no mirror and that the space beneath the optics is capacious. As the field of view, what you can see all at once, is very broad, these microscopes use two independent optical paths -- one for each eye -- so that depth of view is enhanced through stereo vision. These scopes therefor excel at viewing thick objects, such as circuit boards, small animals, coins, and blades, as they have exceptional depth of field. An external light source will generally be required to bounce sufficient light from the viewed object back to the observer.
For viewing blades, looking at tool edges, chunks of wood, or sharpening fine-toothed hand saws, the stereo microscope is just the thing. However, the camera microscope may be a better value for simply looking at tool edges. You've seen what Brooks Beach was able to do with what many would consider a toy.
BTW, you might wish to look at Dino-Lite camera microscopes. They're pretty impressive and do depth of field rather nicely.
http://www.dino-lite.com/
For a dependable Dino-Lite dealer (and all stereo microscopes and photomicrography equipment), I'd suggest The Microscope Store in Roanoke. Mike carries a line of very inexpensive Omano stereo microscopes with limited features that might work for you -- just don't expect high power or wide range of power options. On the other hand, I can see everything I need to at 20 or perhaps 40 power, and a stereo microscope with these two powers can be had for $129.
Most people are overly concerned with power. There are many other optical considerations beyond power alone. My scopes all zoom and can go to much higher powers, but rarely is that needed. Remember, as you go up in power you see less of that object at any one time (field of view).
I hope this helps rather confuses or disappoints you. I do half my work through the microscope and have rebuilt these things, so if you need further help, feel free to ask. And remember, you don't need an expensive scope for blade watching.
I'm eager to hear your USB cam results. Be sure to post. I just love this stuff.
The Microscope Store -- basic stereo microscopes