We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I don't know about el cap, how high is it? But I do think I'd rather not tussle with any wild animals with teeth and claws, bare handed or with gloves. And on the scale of things, I think I'd rather have an argument with a leopard than a rat, and certainly than a badger.
I have friends that raise wild animals for movies and 18 wolves and 3 grizzlies are easier to handle than one 'flat rock' badger. They can take down a buffalo calf.
Their larger more nimble cousin the wolverine can take down an oxen or a moose.
Although I've done a few rather elaborate medallions and end buttons, my favorites by far are scrimshaw* rondels of fossil ivory (or alternative) with edition, monograms, names, dates, icons, and so on. Kept simple, these, to my eye, just look so very right, are ridiculously easy to do, cost a pittance, and offer a graceful personalizing touch to one's work. And as nearly everyone hangs their brush between uses, they get seen.
That's one thing I do, anyway, which answers your question, I hope. I'll be glad to describe other ideas and techniques, Patrick, if you like, but they cross into silversmithing and goldsmithing. Considering where this thread strayed into badgerdom, however, I really don't see that as a problem.
Aside from that, ThomD's got it right. Found objects, pins, coins, military coat buttons, and nearly anything else that's reasonably flat and appropriately sized and shaped will do quite nicely. Catharine could engrave sterling endcaps. I used the ivory button from a reed stop for a liturgical organist friend.
*Anyone can scrimshand. Anyone. You already have the tools and if you're reading this you presumably know how to write and further presumably know how to scratch, scrape, cut and other primitive acts. As scrimshaw can be used to make and decorate handtools and projects made with handtools and is itself a process utilizing handtools, I'll go deeper into the subject if there's interest in it.
Can is one thing. The whole thing is turning the tactical fabric to your advantage. In deep snow a lot of things are possible with ungulates. Leaving aside the fact that at one time almost all these wildlife shows were posed.
Break it down. There is the what can a badger do to thrill a TV audience side of the question. And there is the what can a person with the right mindset do to defend themselves perspective. What we know is that the right person armed with a pointy stick can dominate any animal on the earth, period. And without a pointy stick can still be surprisingly effective.
A guy who wrangles badgers for a living, isn't trying to kill them. Badgers have a "bad" attitude, that will be the animal that day in day out is your worst wrangling nightmare (well assuming it's anything like raising children). But why does a little animal have such a temper? He doesn't naturally dominate his environment.
I think that scrimshaw is very cool. If one is talking about making stuff oneself, there is lathe chatterwork which is very ornate and ridiculously easy. There are epoxy castings. There are little bits of wood parkay, as are used in guitar rosettes. Polished metals. Materials like bone or antler sections. Crystals or stones. Ends of your favorite cartridge case/headstamp. Gears, trashed watch movements. Beer caps. There are many materials sold for pens that are almost overly vivid, acetates, infused woods.
Carved boxwood, tagua nut, resins, metals. And there's castings in pewter, bronze, silver, gold, enamel over fine silver, chased copper, brass, silver, and although I hope no-one ever does it, enameled NASCAR keyfob rounds. How 'bout a nice glass eye?
I can see how a person might have a preference as to which animal they started an argument with. As to which animal is most capable of finishing it... Must say though, when I was a kid, my great aunt called me over to provide water to a raccoon that had been live trapped. Smallish coon. Very big personality. Gave me a whole new appreciation for how 500 pounds of lion must present when that little thing could jump me out of my shorts. That said for the little guys, the leopard is one of the 6 animals in the Big Five.
El Cap is 3000 feet high, none of it easy. Here is a shorter, easier climb the badgers could run laps on for training:
Instead of medallions, whether inset or proud, you can also affix 3/32" to 1/4" slabs of paper micarta, horn, tagua, metals, reconstituted stone, other tight-grained woods, bone, shell, and so on, to either or both top and bottom -- even in between, before turning. I think thicker at the bottom, thinner at the top is best when covering both ends, but anything goes. The only endgrain I leave uncovered is palm, for obvious reasons.
I'd also say just don't let your handles get too big, but my overwhelming preference is for smallish handles. I've noticed a tendency to make handles rather oversized to the point of clumsiness, but tastes vary and rules are made to be deftly broken.
Small objects like shaving brushes are just the thing to try out all manner of design ideas and materials.
I made a hammer handle out of teak a few years ago, because of it's grippy feel. Broke the thing within a week
But, this was a claw hammer. Not one I used for framing, just a general use hammer for finish nails and the occasional larger nail. So I'm wondering if you've ever had a similar problem with it, and what kind of hammer handle you've made.
Most of the ones I have made have been short and oversized by claw hammer standards.
One that I keep getting calls for are the round headed iron mallets used by stone carvers.They like the increased grip when used in sweaty hands.
All my hammers have visually oversize handles regardless of wood type yet anyone who picks them up and uses them finds them quite agreeable.Even people with hands smaller than mine like them.