Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

A not so humble pencil

Posts

Re: A not so humble pencil

#26

#1 Ticonderoga wood (hard to get)

Ron Bauman

Re: A not so humble pencil

#27

Mark Meier (Ann Arbor, MI)

Leadholders

Mark Meier (Ann Arbor, MI)

Great topic. I love all forms of old drafting equipment - especially leadholders and french curves. Here's a nice site with lots to look at (leadholders, sharpeners, etc):

Leadholder Museum

On that site there's also a link to a pretty well stocked Leadholder Store

Mark

PS: Happy Father's Day to all the dads...

Re: A not so humble pencil

#29

Not like that... *LINK*

Scott Burr in Ben Lomond CA

The earliest one I used was like this one ( in high school) circa 1950:


I used these in college:


I use one like this today:


Here's a fun site on the link.

Happy Fathers Day!


Drafting Pencil Museum

Re: A not so humble pencil

#30

Re: Wiley...

Wiley Horne--So. Calif.

Hi Scott,

I'm going to take a look at the twist erase Pentels--that's a key feature I like about the Staedtler. My Pentels have the little bitty eraser that you loosen the metal clamp to advance, and that works on vellum and not much else (my opinion only of course :) .

I like the H hardness, but can see the HB better. On balance I use HB for visual contrast, but have to use the thicker leads 0.7mm or 0.9mm if the wood is not smooth and ready for joinery. Cause otherwise the HB crumbles a lot, as you point out.

Wiley

Re: A not so humble pencil

#31

Re: Business decision

David Weaver

Ticonderoga pencils are the closest thing I've been able to find to the princess pencils that are issued in schools. My dad used to be a teacher, and he'd always have some "princess" left over at the end of the year that I'd quickly claim.

They sharpen nice, and they write nice.

It's amazing how many junk pencils are made without even a passing thought to either of those. You'd think those two things would be a standard starting point for any pencil.

Re: A not so humble pencil

#32

Re: A not so humble pencil

David Weaver

I use zebra brand 0.5mm pencils that also get used at work (I get them at sams - I don't have to buy pencils for work, but I don't like what's available for free).

For rough mark-out, I just use cheap HD carpenter's pencils.

Anyone have any thoughts about white pencils? I've been looking for a good white pencil for a while, but I haven't really looked hard. So far, I've mananged to get two packs of cheap colored pencils just to get the white pencil. I don't want a fat soft pencil like a fabric pencil.

Re: A not so humble pencil

#33

Re: A not so humble pencil

Derek Cohen (in Perth, Australia)

Hi David

I use white and yellow pencils on dark woods. Yes, I admit I still have a few wood pencils. But the lead is soft and breaks easily as the pencils are designed for colouring books, not writing. And that is why I am after lead for my clutch pencils ... at a reasonable price (all I have seen so far is 10x the cost of grey lead).

Regards from Perth

Derek

Re: A not so humble pencil

#34

Re: A not so humble pencil

David Weaver

I have to admit after your original post, I went out in a fit of learning with the intent to upgrade my penciling, and was disappointed to find also that I could not locate good white lead. I was flooded with 0.9mm fabric lead, but that was it.

The other option is prismacolor wooden pencils in a pack of 10 or something for $15, and I'd rather just wait to find something better for fear they won't be a lot better than the cheap rose-art pencils that I can get for $2 and just harvest the white and yellow.

There are several art supply stores here, but none substantial that I can find in a convenient part of town - it would take literally an hour to get to and from the locations 5 miles away any hours that they're open.