Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Chisel Handles

Posts

Re: Chisel Handles

#26

Re: Using the side approach

Bill Houghton, Sebastopol, CA

I've tried to master that one-handed nail starting technique, but without success - but I realized in reading your description that I've always tried it with my fingers coming UP around the handle. I'll have to try it t'other way.

And, as to new timers: it 's a corollary of the axiom behind the proper definition of experience: something it would have been very nice to have, just before you needed it (or, saying it another way: "Good judgment comes from experience; experience comes from bad judgment.")

Re: Chisel Handles

#27

I'd best not ever visit that shop, then

Bill Houghton, Sebastopol, CA

It's not for spiking rusty 20d common nails into dry Douglas fir; more for 6d or a little bigger nails into nice soft trim, or tapping rather than driving. It's great in awkward spots to start the nail, after which I usually revert to proper driving. Also great in tight spots, which occur more often than statistically probable in remodeling.

I've seen more than one carpenter, including my very experienced son, use the side of the hammer; and I've purchased more than one hammer at yard sales with clear evidence that the side of the head was used for hammering. But then, I've also seen a few hammers that were clearly once in the hands of someone who didn't know the limits of this technique.

I don't imagine the hammer manufacturers recommend it - done wrong, it could distort the eye of the hammer, and that portion of the hammer may or may not be tempered for striking.

Re: Chisel Handles

#28

Re: Hammer ergonomics

Pam Niedermayer - Austin, TX

I always thought that the trunnel (tree nail, peg) driving with the hammer side was because the side of the hammer has a larger surface than the head, same with those Chinese hammers.

Pam