Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Japanese finishes question.

Posts

Japanese finishes question.

#1

Japanese finishes question.

Scott Burr in Ben Lomond CA

Does anybody have any info on those lovely lacquered finishes?

Thanks!

Re: Japanese finishes question.

#2

Stephen Shepherd

Re: Japanese finishes question.

Stephen Shepherd

For a complete as possible description of this multifarious process read in Memoirs of a Strange Savage by Father d�Incarville published in the 18th century.

Stephen

Re: Japanese finishes question.

#3

Re: Japanese finishes question.

Pam Niedermayer - Austin, TX

Urushi (sp?) is the poison in poison ivy, oak, sumac, rosewood, cocobolo, and many other plants to which many people are allergic; and if you're allergic, it's not like you can develop antibodies and some resistance, instead you get more allergic. So approach with great care.

Pam

Re: Japanese finishes question.

#4

Fine Woodworking

Bill Houghton, Sebastopol, CA

FWW did an article on it some years back - I think in the black and white days. My issues are more than a little hard to reach right now, but you might be able to get a reprint from them.

I remember it sounded really intimidating; and, as Pam mentions, it's an allergen. It was impressive to hear of bowls on which the wood had rotted away but the finish was intact in the shape of the bowl.

Re: Japanese finishes question.

#5

Ellis Walentine

Begs the question...

Ellis Walentine

... of whether it might be possible to overcome the allergy. The only reason I bring it up is that, as a little kid, I used to have very severe reactions to poison ivy -- rashes, blisters, etc. -- but I took pills called "AntIvy" for a while and was essentially cured of my poison ivy allergy. To this day, I can pull out poison ivy vines with impunity, maybe just a slight itching now and then. Of course, wouldn't you know, my wife is still highly sensitized, so I am persona non grata after mucking about with poison ivy. I've never tried urushi lacquer finishing, so I don't know if my "immunity" extends to that as well.

Ellis

Re: Japanese finishes question.

#6

Re: Begs the question...

Pam Niedermayer - Austin, TX

Wow, I didn't know there was cure, guess it's time for a trip to the doctor, I've got all these weeds in the back yard that have some variation of poison for me. I do know that urushi is a noted danger and is not used much these days because of it.

Pam

Re: Japanese finishes question.

#7

Same with me and poison oak...

Scott Burr in Ben Lomond CA

I got shots from the family doctor 3 about a week apart then a booster once a year. No more issues with "the oak" thank goodness ;)

Re: Japanese finishes question.

#8

Thanks everyone.

Scott Burr in Ben Lomond CA

I did some searching on urushi lacquer finishing. I have a feeling I won't be trying this anytime soon. Too nasty and complicated for me.

I'll stick to plain 'ol stinky lacquer.

Thanks again.

Re: Japanese finishes question.

#9

Good to hear, Scott, just that easy, amazing.

Pam Niedermayer - Austin, TX

Re: Japanese finishes question.

#10

Re: Japanese finishes question.

Robin Corell in Atascadero CA

As you discovered urushi has its challanges. a promising alternative is cashew nut shell oil. It does not need a humid environment to cure like urushi does but even better is that often a satifactory finish can be obtained with 3 or 4 coats vs 30 coats for urushi.

japan woodworker had it for a while but there was a problem with VOC's and california. I did find a saword restorer in oregon of washington that had small amounds for sale. I didn't follow through and I have no idea how to apply it.

I should add that sumac and cashew are in the same family and cashew nut shells are very toxic.

Robin

Re: Japanese finishes question.

#11

Re: Japanese finishes question.

Robin Corell in Atascadero CA

urushi is actually the unrefined sap from a specific tree that is sometimes refered to as japanese sumac. The poison in it is urusinol(sp). Prolonged use leads to a permentant loss of feeling in your extremities as well as a red inflamed "rash". In my book that sounds way different that the typical poison oak reaction, at least from the west coast poison oak.VBG

Robin

Re: Japanese finishes question.

#12

Re: Japanese finishes question.

Pam Niedermayer - Austin, TX

Yes, the urushiol in urushi is extreme, but it's a cousin to the urushiol in poison ivy, et al. Perhaps there are shots one can take for urushi sensitivity?

Pam

Re: Japanese finishes question.

#13

Time for a visit to Madagascar? 

Pam Niedermayer - Austin, TX

Re: Japanese finishes question.

#14

Re: Japanese finishes question.

ThomD

Not a doctor, but been to them for a variety of sensitizers. Mostly one gets progressively worse with exposure to these things. In one article I read about the lacquer it said that approx 30% of people were not bothered by it, the rest are doomed. Ran across a similar thing when I happened to be on a boatbuilder site, and they were looking for help, and mentioned they wanted applications only from people with 0 sensitivities. So maybe it is the same thing there, they have employees who never go off on epoxies, while the majority are just burning fuses of various lengths.

I have had experience with things that have got better, mosquito bites don't bother me as they once did, poison ivy just keeps getting worse, but not quickly. The oddest thing I reacted to violently was wearing gloves over barrier cream. Apparently a very bad idea, though many people try it in the hopes of doubling their protection. Surprised me because one thing the cream is used for is baby rash, under diapers, not all that different a situation.

Re: Japanese finishes question.

#15

Re: Japanese finishes question.

Pam Niedermayer - Austin, TX

For sure it's progressive. It's gotten so bad for me that last summer I actually hired someone to pull the weeds; but he apparently wasn't careful about pulling them out by the roots, so they're all back with a vengeance. I pulled the few that got to the front yard, and itched and scratched for a couple of weeks; so I don't know what to do other than cover up from head to toe and dive in. Problem is they're so tall that I'm afraid they'll get to my face and neck, to say nothing of the heat. Aaaaaaarrrrrrrrrgggggggghhhhhh!

Pam

Re: Japanese finishes question.

#16

Issue#51,Mar/Apr 1985

John Pappas

Re: Japanese finishes question.

#17

Re: Japanese finishes question.

ThomD

Well not that I like to support Monsanto, but we did spray with roundup, and it worked pretty well, if killing everything in sight is the goal. I drove around in the tractor, and sprayed with a hand plant sprayer, at least the tractor kept me somewhat above the fray. I would imagine a Tyvek suit and accessories would probably make you plant proof. I have seen some of the body suits at dollar store prices. Single use then chuck. Out PI used to be very limited, only a few patches, but it has taken off something terrible in recent years.

Re: Japanese finishes question.

#18

Re: Japanese finishes question.

Pam Niedermayer - Austin, TX

Body suit, now that's a great idea. I think climate change has brought on crazy plant growth here, they're TALL and FAST growing, they'd taken over the yard almost before I noticed they were there. Maybe we should just shovel it all up and start again. Or maybe introduce a lot of shade with temp tents, they seem to hate that.

I tried roundup when we first moved in, but it did kill everything in sight, truly horrifying, as is the evil M.

Pam