Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Homemade Infill Jack *LINK*

Posts

Re: Homemade Infill Jack *LINK*

#26

Re: Homemade Infill Jack

Todd O. Cronkhite

Sorry to hear that your Shop time has been limited these days,but I know that you've got your hands full. In the end your sacrifice will pay off with Rewards beyond Imagination tho, and to you Sir, I take my hat off.

Re: Homemade Infill Jack *LINK*

#28

Jack Guzman from Maine

Bob's comment

Jack Guzman from Maine

I agree with Bob's comment .I hope you decide to come around more often. This place gets awful quiet sometimes without you and Todd posting. It seems like a part of Woodcentral I've gotten used to is gone.---Jack

Re: Homemade Infill Jack *LINK*

#29

Holdfasts- make your own

Dean Lapinel

This is pretty basic forging. I think anyone can make a holdfast with a small amount of guidance. There are many ABANA members out there. Anyone near Boise can contact me and use my equipment to make some.

Re: Homemade Infill Jack *LINK*

#30

Re:  Holdfasts- make your own

Thomd

I agree. The very first forged Item I made was a holdfast. So really no experience, ability or prior instruction is required. At the time there was a good article by Chris Schwartz on the details of various holdfasts. In fact, such reviews probably also miss the point which is essentially that any holdfast, pretty much, can be tweaked into perfect order if it is made for a particular bench condition (holdfast geometry vs. hole size and depth). So it ends up being easier to make one that to buy, if you have access to a forge.

Re: Homemade Infill Jack *LINK*

#31

Re:  Holdfasts- make your own

Dave Chatham

Do I even need a forge to make one? We are talking about a flat spot and a 80 or so degree bend right? Can't I just heat a 3/4 inch rod with an oxy/actylene torch and do the deed, not to deny the fine forge work done by many but thats the way it looks to me, a no forge skills at all guy. I am looking for a basic working tool not a work of art, sorry no offense meant to all you forgers out there.

Re: Homemade Infill Jack *LINK*

#32

Go for it!

Bob Hackett

You don`t need a leather apron and a large oak tree to set your anvil under either.

Whatever get the job done is what`s important.We promise not to tell anyone that you didn`t use any coal or even a bellows to do the deed.;^)

MB

Re: Homemade Infill Jack *LINK*

#33

Re:  Holdfasts- make your own

ThomD

Sure, though you are now all of a sudden forging. See how that works!.

Many of the current crop of hold downs use very flat arms so there isn't any need to bend the material around a horn on an anvil. Making the end does require some drawing out, but you don't need a "real anvil" to do that either.

Re: Homemade Infill Jack *LINK*

#34

Re:  Holdfasts- make your own

chichi1golf

I agree with the others. Holdfasts are easy. Use stock close to hole size. My holdfasts are a pain sometimes because they stick to the bench when I remove the piece. Anyone near La crosse Wi. that wants one can PM me. I can make one or teach them how.

I dont want to take away work from professional smiths who need the $, but if you are a ww on a tight budget that could not otherwise afford the $100, I can help you out. I bet you could do a vine like neck with a curl in it and it would still do a good job. A snake head shape(ugh) at the end would work,leaves etc.,etc.

Bob