Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Homemade Infill Jack *LINK*

Posts

Homemade Infill Jack *LINK*

#1

Homemade Infill Jack *LINK*

Todd O. Cronkhite

Dunno if this is gonna work or not, but here goes nothing.

If it does work, you'll be looking at the first plane I made. If you compare it to antique Infills you'll see how badly I dorked up the body design, but it works a'treat I can tell you! :)


Homemade Infill Jack

Re: Homemade Infill Jack *LINK*

#2

That's truly cool!

Bill Houghton, Sebastopol, CA

Do you have metal-working machinery, or are you doing it all with files and such?

I like the lines of the front knob, and the side scallops. From the aesthetic perspective, I think the only weak point is the thumbscrew - depending on what thread pitch that is, you might look at Lee Valley's thumbscrews, which come in 1/4" and 5/16" sizes.

Nothing dorky about that plane at all.

Re: Homemade Infill Jack *LINK*

#3

Re: That's truly cool!

Todd O. Cronkhite

Well Bill, Yes and No to the metal machinery question. The only "metal machinery" I used was when I roughly cut out the design of the body and the lever cap on the metal cutting bandsaw at the school where I work. All the shaping thereafter was done by hand with files. I did use a drill press to dril the holes for the screws that the lever cap pivots on.

Ya, you can't see how badly I dorked up the body because you don't have anything to compare it too, just wait until I post a pic of the 5.5 that I building----mucho grande better. I also need to tweek the design of my Scrubber a wee bit too, which is because I didn't realize the design flaw in that one until I was making the 5.5. No matter, Live and Learn.

Ahhhhhhhhhhh, be knocking on my thumbscrew are ye? >( Well Sir, I'll just have you know that I quite my like "found on the cheap in my scrap heap" thumbscrew very, very much Thank-you very much, and have decided that it will be my Trademark. Sorta' reminds me of the nail that Gary Bennett used in his nice little cabinet that caused such a flap a number of years ago. ;) No worries Bill, I took quite a beating for it over at WoodNet too. :D

Thank-you for the kind words about the lines of the Bun. I am hear to tell you that designing that Bun was the hardest part of the entire project. I bet I made a good 10 of them before I was happy with the "lines". Coarse, that's nothing, I made 22 bun mockups for my Scrub plane, :b then chose the 3rd one that I had designed.

What 'til you see the one on my 5.5 tho, it's going to be a real Beauty. :)

right now the 5.5 wood is just made out of glued up 2x material, while I find some proper wood for it, but it's looking GOOOOOOOOOOD---to me at least.

Re: Homemade Infill Jack *LINK*

#4

An offer

Bob Hackett

How would you feel about some real,down home,hardwood from the "Motherland"?

Say some bird`s eye or curly maple,flame birch or maybe even some cherry burl?

PM me if you think this might be something you could use.

I also have some old laminated plane irons and a couple of Cecil`s rough cast lever cap screws that take an insert if you`d like to switch out your "trademark" there Todder.

MB

Re: Homemade Infill Jack *LINK*

#5

Re: An offer

Todd O. Cronkhite

Huh, Oh, Gosh, How long have I been out? Last thing I recall is Bob making me an offer of Motherland Woods, AND plane making items from the Pride of Maine, the Late, Great Mr. Cecil Pierce himself. Next thing I know, I wake to the cat licking my face. Perhaps I dreamt this whole thing, I darest not check 'cause I'd hate to spoil this WONDERFUL dream.

Bob, I have yet to discover how to send PM's here, so I cannot send you a PM, nor do I know where to find your e-mail address here, so tell you what, to start the ball rolling via e-mail drop me a line at tocronkhite@hotmail.com*

*all right, now that my e-mail address is out there, I don't want t be getting no midnight crank calls. :( ;)

Re: Homemade Infill Jack *LINK*

#6

Re: An offer

Dan Donaldson

The way that the pages work, it is very difficult (if possible at all) for the bots to harvest e-mail addresses here. My address has been here for years and I get no spam that can be traced to here.

You can find the e-mail addresses next to the name in posts where the poster has a profile and lists an email address. Take a look at my name above if you read this message and you will see my address.

That is one nice looking plane. Can't wait to see the next one.

Re: Homemade Infill Jack *LINK*

#7

Re: An offer

Todd O. Cronkhite

You know, hiding stuff right in plain sight is the best way to ensure that I'll never find it. :\

Re: Homemade Infill Jack *LINK*

#8

I'm getting an urge!

Marv

Hi Todd,

Reading and seeing pictures of planes some of you guys are making is getting me in a mood.

I'm afraid though, I'd come up with something I'd be afraid to post a picture of. A couple weeks ago we had an endless thread regarding a plane being sold on eBay that a guy made. After ragging on the design of it and critiguing it to death, it finally sold for about $835. I think every regular here at WC contributed to the thread. Interesting thread though, you should have been here.

I don't know, I think I'll think about it more or until the urge overwhelms me.

I'm thinking that steel channel would make a good base. Whataya think?

Considering how you practically handmade your plane, I'd say, damn good job. You should get Catherine Kennedy to perform her magic metal carving skills to the sides of it. Have you see her work? It's amazing stuff. She runs an ad in here at the bottom of some of the pages and she has posted some pictures of some of her work.

Marv

Re: Homemade Infill Jack *LINK*

#9

Link to the Lazarus plane *LINK*

Marv

Todd,

For your interest, below is a link to the plane auction that was discussed in the thread I mentioned in my previous post.

Marv


Ebay Lazarus plane auction.

Re: Homemade Infill Jack *LINK*

#10

Not too shabby Todd

Scott Burr in Ben Lomond CA

I like it, it ain't no Norris but, I'll bet it performs better!

What kinda blade do you have it?

Well done!

Re: Homemade Infill Jack *LINK*

#11

Re: Not too shabby Todd

Todd O. Cronkhite

Scott, the blade and chipbreaker is a flea market find. I'm sure that it came out of an old woody, at the top in an arch, I can just make out the last few letters of what I believe is Moulton.

The wood is help in with Epoxy and has no pins thru it.

Both the tote and the Bun are one piece deals. I don't care for the totes that are "built up" of sandwiched pieces.

Re: Homemade Infill Jack *LINK*

#12

Jack Guzman from Maine

Holdfasts

Jack Guzman from Maine

Todd,it's good to hear from you. That is a nice looking plane. I've just got to give that a shot. I made a woodie but I never tried an infill except from a kit where most of the fabrication is already done.

I like your holdfasts. Where did you get them? Homemade? I like my grammercy holdfasts but I would really like to have some with a little more style.---Jack

Re: Homemade Infill Jack *LINK*

#13

Re: Holdfasts

Todd O. Cronkhite

Jack,

Those holdfasts where made by Jake the Russian. I tell you they arethe best money I spent in many a'year, and my only regret is that I only bought 2 instead of 4. Hopefully the link wil work, but if not Google --galena forge--. The way I understand it Phil Koontz is sort of the go-between, between Jake and the customer.

Re: Homemade Infill Jack *LINK*

#14

Carefull Bob...

John in NM

I'd use a PO box for the return address.... Todd's going to be camped out on your doorstep if you give him a taste of Cecil Pierce artifacts! :D :D :D

Todd, that plane looks fantastic! You definitely get bragging rights in my book, and if you figure in my totally made up ratio of cost vs utility, you're nipping right at the heels of the great Cecil himself! No one can question your downeast roots when you've got that trademark (free) levercap screw! (This coming from the guy who made 3 - count 'em, 3 - nuts for a faceting machine rather than pay the $15 for one from the manufacturer. The third one worked pretty well).

I bet you could find a bunch of old bronze propeller blades down there in Fla-da, make lever caps from them, and make that part of your marketing, like the whole Japanese anchor chain cast iron or whatever the heck it was. Make sure to leave a few barnacles and patina for authenticity. :D

Re: Homemade Infill Jack *LINK*

#15

Whoa, Todd O! You done good!

Hank Knight

That baby looks great! It has come a long way since the last photos I saw of it. Very nice indeed. :)

Hank

Re: Homemade Infill Jack *LINK*

#16

Re: Holdfasts *LINK*

Todd O. Cronkhite

Here is a Link,--- I hope--- to a Battle of Holdfasts. I have not personally tried the Gramacy ones, so I can't vouch for them, but I can for Jakes, and I like them Tremendously!

Finding them on his site can be a hassle, but if nothing else, just e-mail Phil Koontz and he'll get you set up. I have the ones that are the longer of the two. As I said before, if you can swing it, buy at least 3, if not four---at least.


http://rogersfinewoodworking.com/blog/?p=158

Re: Homemade Infill Jack *LINK*

#17

Re: Holdfasts

Dan Donaldson

What is the cost of those holdfasts? I tried looking at the website, but could not see any pricing info.

Re: Homemade Infill Jack *LINK*

#18

Re: Holdfasts

Todd O. Cronkhite

To tell you the Truth Dan--I've forgotten, but I can say that that is a good thing because if they wasn't worth the money I had paid for them you can well bet that I wouldn't of forgotten.

I just e-mail Phil to inquire of today's pricing and I'll let you know what he says as soon as I hear back from him.

Re: Homemade Infill Jack *LINK*

#19

Jack Guzman from Maine

Re: Holdfasts

Jack Guzman from Maine

Thanks Todd. The gramercy holdfasts are excellent. I've been using mine for a couple years now with only one complaint. They're machine formed and look it.

They work just like you expect these things to work. Well designed. Just not very pretty.--Jack

Re: Homemade Infill Jack *LINK*

#20

Stright from Phil Koontz

Todd O. Cronkhite

Boy, talk about a quick response, I just e-mail Phil not to long ago, and already I have a response. Now that he mentions it, I think the $110.00 is the same price I paid a few years ago. They are certainly worth the money in my book,

Here is what Phil said, I did a Cut and Paste from straight out of my e-mail.

Hi Todd--

Thanks for asking. Our holdfasts are $110 per pair these days, including priority mail postage in the US and Canada. To order a pair, just send an email to either me or Jake at

"Jake Pogrebinsky" <jakepogrebinsky@yahoo.com>, with a mailing address, and we will get them on the way. So, I guess you could say that payment is optional, but we ask that people return a personal check to Jake at the return address on the box.

A recent (well, only a couple years old) pic of Jake's work is attached.

Really appreciate the word of mouth kinda thing.

Phil Koontz

Galena, Alaska

Re: Homemade Infill Jack *LINK*

#21

Thank you sir. 

Dan Donaldson

Re: Homemade Infill Jack *LINK*

#22

question for you, sir.

Bruce, a MN Galoot

First, that looks really good, Todd. It's amazing what can be done with a whole lot more ingenuity than I have :D

Here's the question. Most square tubing and channel iron I've seen has a moderately rounded corner. What did you do about that, because it appears that the corners on the plane are sharp?

Re: Homemade Infill Jack *LINK*

#23

Re: question for you, sir.

Todd O. Cronkhite

Bruce, Thank you for the kind words.

In regards to the corners of the square tubing---more importantly, the finished product, the corners are still in fact quite rounded, and Truth be told, I them that way just fine. No worries about hangups.

No Bruce, I'll say this. When looking carefully at the profile of most square tubings, you'll notice that the corners are higher then the sides them selves. If you want your cheeks to be flat then I suggest that you drawfile them flat before your cut the tubing. I do this by merely laying the file flat and rubbing it back and forth until everything is flat all the way across, or at least "close enough" I don't use micrometers, or flat plates or none of that high tech machinist stuff, it's all by eye and seat of the pants engineering.

Quite honestly, I don't flatten my cheeks, only the sole, and even then it's not Dead Flat, so if you are a member of the Dead Flat Sole Society, then this is not for you.

Take a stab at it Bruce, you can't dork things up any worse then I did on my first one, and if you do, well heck, square tubing is cheap enough.

I'll say it again because it is so astounding, once you try an infill you'll wonder why you even bothered with those Stanley toys.

My Homemade Jack makes my Stanley 5's seem like those sheetmetal stamped blockplanes that are used to shave Balsa wood.

Re: Homemade Infill Jack *LINK*

#24

Re: Homemade Infill Jack

ernie miller

Wow Todd that turned out great much better than the one I made several years ago. Almost wished I would have kept it but it went for the Katrina auction so I am happy. I can always make another if I wanted but your came out much nicer than mine. Gald to see you still in the shop. My time in mine seems shorter all the time.

Re: Homemade Infill Jack *LINK*

#25

I still occasionally use...

Bob Hackett

That neat little LA bullnose infill you sent me one year for Secret Santa I believe,Ernie.

The rest of the time it sits on the bookshelf here in the livingroom with the rest of the rare tools I don`t trust to the shop or just want to show off.

Wish I could come up with a maker`s mark as neat as your WM2 (with linked w and m and small 2,like a chemistry formula) but so far no luck.

Good to talk to both you and Todd.Hope you both take this as an invitation to stay in touch more.

Mainely,Bob