We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Flitting from whim to whim as the wind of the web blows....
Must need more shop time
Have you messed with channel iron too? A bit heavy maybe, sounds like the square tube is quite beefy enough from your results.
Maybe I better find you a nice piece of mesquite for infilling.... I've used or given away most of the thick stuff I had around, but I can raid a couple friends scrap piles next time I'm in Tucson.
Yeah, I promise you John, once you try an Infill you'll look at Stanley type planes a bit less lovingly.---especially the Scrub---if I must say so myself,--- which I must because as far as I know I have built the only Infill Scrub plane known to Man, or at least to this man.
No, I have not fooled with channel iron, but only because I haven't found a piece in the trash---yet. I do think that it would be a bit too heavy tho, but boy it's sure make a corker of a Smoothing plane tho, eh? Not to mention the workout you'd get from it.
Welp, Tie Me Kangooo Down Sport, it seems that I have crossed into the Inner Circle now, and have a whole bunch o' buttons at the top of my screen to fiddle with, as well as all sorts of boxes at the bottom to plug stuff into, so Let The Games Begin as I try to sort them out, or in my case, Let the Pain Begin, because I hate trying to figure this type o' stuff out. If WoodCentral suddenly goes dark.....it'll probably be my doing.
but I cheated and used an old Stanley lever cap, so the blade has a tendency to walk back on the bed during heavy use. On the one hand that's annoying... but on the other hand it gives me a reason to take a breather while I re-adjust the blade.
One day I should make a proper cap and a heavier blade.
I even used it when framing the roof of our house, much to the amusement of some of the other guys helping out. I told them it was my cordless planer.