Todd O. Cronkhite
Jack Guzman from Maine
>Where is Todd? I haven't seen him post here in a long time. Does anyone know if anything happened to him,or did he just get tired of computers?---Jack
Knowledge You Can Build On — Est. 1998
Todd O. Cronkhite
Jack Guzman from Maine
>Where is Todd? I haven't seen him post here in a long time. Does anyone know if anything happened to him,or did he just get tired of computers?---Jack
Re: Todd O. Cronkhite
Bill Houghton, Sebastopol, CA
>I see him now and again on one of the other fora - I think it's WoodNet, but I'm wrong about something at least once a day (my wife says I'm wrong about how often I'm wrong and that I understate the figure).
I don't know - maybe it got to be too hard having other Mainers here on WC, and knowing what he's missing down there in Florida.
Re: Todd O. Cronkhite
Jack Guzman from Maine
>Well ,that's good he's ok anyhow. If you happen to cross words with him tell him he's missed.---Jack
Times two!
Bob Hackett
Times 3!!! Also...
Scott Burr in Ben Lomond, CA
>Any word on Ernie Miller?
I Miss Rupert...
I think all of us would love to hear from Todd.
Pam Niedermayer - Austin, TX
Re: Todd O. Cronkhite
Hank Knight
>I sent Todd O an e-mail yeaterday telling him he was missed and asking him to check in. He's pretty good about responding promply, but I haven't heard from him. He must be out of town or something.
Where's he at?
Bill Tindall
>I'm headed to FL next week on a job. I'll roust him out of hibernation. I miss his down east insights. He sure missed a "good" winter.
My speculation
Bill Houghton, Sebastopol, CA
>I bet he headed for the Florida panhandle as soon as the snow started falling there, and is even now busily trying to figure out how to get some home.
Somehow, I've never sensed that the joys of life in Florida - toy-poodle-eating alligators and all - have ever displaced Maine in Todd's heart.
Not to worry
Bob Hackett
>It would seem the Maine winters are headed toward him at a pretty good clip.
My son in PA had over 3 times the snow we did here on the mid-coast.It was 50 degrees in downtown Portland yesterday.
I almost took the bike out for a spin.If the wind hadn`t been so high I would have.
MB.
OY!!
Todd O. Cronkhite
Well, I must confess that it feels good to be missed, but I must also say that I am sorry for being away long enough to be missed in the first place. Completely my fault, I'm certainly not mad at anybody here, or nothing like that. Matter of fact, I've quite often wondered how "The Gang" was doing. I started hanging out at WoodNet because my buddy down here was always talking about what was going on there, and therefore to be able to know what he was talking about I'd go there as well. The problem arose because over there there is a "Off-Topic" section called "The Basement" and I more or less became a "Basement Rat" and as it is wont too, Time marched on.
Jack, I was alerted to your "APB" by a fellow from WoodNet, then Hank Knight rattled my cage then the Big Guy himself dropped me a note. I will confess that I actually read the thread this past Saturday night and just as I was getting ready to respond my newest kitten jumped up onto the computer desk and made a pest of herself, then, once I got her settled down two of my favorite T.V. shows came on, and when they went off---I went to bed.
Since then I swear, because the weather has gotten so nice I have been runinng around all wiggly-squiggly doing this and doing that and in general getting nothing accomplished but enjoying the heck out of doing it.
Over the length of Time that I have been "gone", which I know has been at least a year, I have gotten hooked into making Infill planes out of square tubing and found wood. My first one, which was a Jack came out well, but I totally dorked up the design, but it works AMAZINGLY well. I used an old iron from a woodie for that one. the next one I made was a Scrub. Yes, an Infill Scrub plane. for that one I used a file for the blade, and I am here to tell you that this beast makes all other Scrubs, to include my LN feel like toys. Hooggly-Moogly, this thing is the meaned, baddest, hand held, muscle powered, wood shredding device ever created, and I keep it looked in a doubled walled solid steel box to protect the World from it. It's so bad that it makes the Tasmaniamn Devil look like a shy bunny rabbit.
The next plane I made was suppose to be Miter plane, but the Dark Forces of Evil where messing with me the day I cut the wood, and it ended up being a Smoother, but ahhhhhhhhh well, it works reeeeeeeeeeeeeal good. For the blade in that one I used a piece of 18-wheeler spring. I've started a mini Smoother, but haven't finished it yet, because I wasn't satisfired with it, and I have a 5.5 sized one all mocked up that has been awaiting Warmer Weather and Wood to complete, but it's going to be a real hum-dinger for sure.
Once I learn how to post pics here, I'll post pics of them. they are certainly no Wayne Andersen's, but they'll do.
I'm stil dreaming of the day when I can leave this ant-hill and return to Maine, but I fear that it may be quite awhile longer yet, especialy considering the current economical climate. :~(
At any rate, all is well with my Family and Myself, and the ol' S-10 is still chugging along.
TODDER!!!
Bob Hackett
Good to hear from ya chummy!
I was also off line for awhile due to a life changing injury but I`ve been back for awhile now.
Sure have missed ya chum!Glad to hear you`re all right.
Mainely,Bob
Todd: I sent you an e-mail
Bill Houghton, Sebastopol, CA
explaining about picture posting.
Good to see you drop in!
John in NM
Make sure to show us some infill plane pics....
Re: Good to see you drop in!
Todd O. Cronkhite
Thank you John, and yes, I'll show pics of the planes when I learn how to post pics here.
Ellis played a trick on me. I received an "e -mail" from Bob, which I responded too, only to find out that it was in fact a response that he made to my post here, and I actually responded back to Ellis. Seems I need to learn about all the changes that have been made while I was Away.
Sooooooo Mr. O
Scott Burr in Ben Lomond CA
You use any of that 'ol LN collection in making your infills?
Nice to see your OK 
Re: Sooooooo Mr. O
Todd O. Cronkhite
As a matter of fact Scott----No.
To top it all off my Homemade Infill jack makes my LN#5 seem like a block plane! that is not to bad-mouth LN's, but to illustrate the magnificent difference between an Infill and a non-Infill.
There is a guy over on Woodnet that is a Infill collector and I eanted to see what was so great about them, but could'nt justify the expense of an antique one, so I built one, and I am absolutely Astounded by the difference.
I've thought and thought and thought about selling off those LN's, but can't bring myself to do it. They are nice planes, but dollar for dollar the vintage ones do well enough for my money, but then again, I am a cheap bugger. I justify keeping them now to compare my Homemade Planes against.
I'm pretty much going to totally change up my woodworking style, and it won't include many planes. I'm foing for the "rustic style" which will involve primarily a Froe, Hatchet, Drawknife, Scrops, a few boring tools, and a few chisels.
I will however continue making planes for a while longer anyhow just because I don't have a full set of Infills yet, it is quite enjoyable to do, and I don't need a bazillion tools to do it.
So, what's new with you, Mcgoo?
Funny you should ask...
Scott Burr in Ben Lomond CA
I'm working on a little infill smoother right now. It's to be built on a Stanley 220 block plane base
. 25 deg bed angle with a bevel up blade. It's on hold right now. 
I've been out of work since late Sept. and the job market here SUCKS (not in a good way if you know what I mean).
I also restored a Tomlee lathe, but no $$ to buy any accessory's so I can't learn to turn.
It's starting to look a bit better here but with so many designers/ engineers out of work it's dog eat dog.
Re: Funny you should ask...
Todd O. Cronkhite
Yeah, I'm sure sorry to hear this bit o' news Scott. I know that Cally has been been hit hard by the current situation. Perhaps this might be the optune time to make a career change to something a bit more "recession" proof.
Well hey, it seems that once again great Minds are thinking a'like, be sure to post some pics of your homemade plane as well.
I dunno what a Tomlee lathe is, but I'm sure it's a good 'un, otherwise you wouldn't of bothered to resto it.
Right down your alley, Todd *LINK*
Bill Houghton, Sebastopol, CA
As a specialist in structural-steel infills, you'd like the design. The bed is predominantly channel steel, fastened to castings on each end. A slot down the middle of the base of the channel accepts the tailstock and toolrest banjo fastening.
I happen to know this because Scott and I traded some tools.
Courtesy of Old Woodworking Machines.com
Re: Right down your alley, Todd
Todd O. Cronkhite
Ahhhhhhhhhhhhh yes, a nice little lathe indeed! Easy to set up and stow away, plus it'll accept a face plate to some bowl turning. Thanks for the pic Bill.
Bill beat me to it!
Scott Burr in Ben Lomond CA
Glad you like the lathe here it is all done:

As for the infill here it is in the planning stage. The poplar is only used to develop a pattern for the real stuffing probably walnut or some jungle wood.

So I showed you mine, let's see yours!
As far as recession proof jobs I should have became a garbage man 
Re: Bill beat me to it!
Marv
Very nice restoration job, Scott....I really like how you mounted it on the wall like that. Gives you more floor space. 
Marv
No worries Marv...
Scott Burr in Ben Lomond CA
I'm gonna paint it "Marv Deere Green" 
Re: OY!!
Pam Niedermayer - Austin, TX
Glad to hear you are so reachable, and it's so cool that you're our newest successful infill maker.
Pam