What is this?
Thomas Skaggs, Foothills of Mount Level
>A friend of mine sent me a picture of this. I assume a measuring device. Any ideas? 
Knowledge You Can Build On — Est. 1998
What is this?
Thomas Skaggs, Foothills of Mount Level
>A friend of mine sent me a picture of this. I assume a measuring device. Any ideas? 
Machine or wood screw gauge?
Bill Houghton, Sebastopol, CA
>I would try a few sample screws to see if, say, #10 machine screws align with the #10 line.
I wonder if the "USMC" in the corner means it's an official Marine Corps whatever-it-is.
Now, if you'd posted this on Old Woodworking Machines, someone would have said, "It's a quarter."
leather thicknes guage?
Robin Corell in Atascadero CA
>Just a guess but the sizes by each number looks like about the right size for it to be a guage to detrmine leather thicknes in ounces. Or it could be for sizing pemintos to stuff in olives.
Robin
It's a...
Scott Burr in Ben Lomond CA
>Divot fixer for golfing. The scales read how bad you dug your club in the dirt. The lower the number, the worse you screwed the pooch.
In all honesty, I have no clue...
More likely something like that, yes
Bill Houghton, Sebastopol, CA
>As I look at it again, I see "x-1/2" markings on one side, so your conjecture is more likely than mine - I'm not aware of anyone making half-sizes in machine screws. It is NOT, for sure, a sheet metal or wire gauge, at least not for any of the standard gauge measures, since the numbers are running in the wrong direction.
Someone who knows what s/he's talking about will come along any minute now, and leave us all saying, "Of course that's what it is!"
That's it.
Thomas Skaggs, Foothills of Mount Level
>Good Guess Robin,
My friend researched it and indeed it is a leather gauge. The USMC was a shoe maker. The leather was thicknessed for shoe soles.
Tom
Dang
Bill Houghton, Sebastopol, CA
>and here I was picturing an official leather-thickness-measuring gauge for field repair of early-20th-century Marine gear.
Re: What is this?
Gary Roberts
>Yup, a leather thickness gauge. The USMC made industrial shoe making equipment here in Massachusetts. They're still exist, though under new management, once again.
Iron Guage
Jerry Draper
>It is used to measure the thickness of sole leather. The standard of measurement for sole leather is in Irons. I think one iron is equivalent to 1/32 inch. The edge of the leather is wedged into the gap to determine the number of irons. Leather soles on shoes normally ran from 7 iron to 12 iron depending on the shoe/boot style. Sole leather is no longer produced in the U.S. and nowdays very few shoes have leather soles.
Re: What is this?
D. Tardiff
>To enlarge on Gary's reply...it's from the United Shoe Machinery Corporation.
Most of my grandparents and their siblings worked there in Salem and Beverly MA.
I've got some of their ID badges, and a few toolboxes full of USMC-marked wrenches.
what about the text?
paul womack
>Any identification must have an interpretation of the label on the two scales;
USMC and SZG3R.
Googling has been unhelpful on this.
BugBear
Having been reminded...
Bill Houghton, Sebastopol, CA
>I'd run into another "United Shoe Manufacturing Company" item before; I think that explains the first set of initials.
I presume the second one is the model number.