Thanks Bill
Bob Hackett
Knowledge You Can Build On — Est. 1998
Thanks Bill
Bob Hackett
Wilbur, that's not a chisel, THIS is a chisel...
Kevin Adams
>Fresh off the "what's new" pages at LV...
http://www.leevalley.com/wood/page.aspx?c=2&p=62599&cat=51&ap=1
Btw, great post!
Take care,
Kevin
Re: Wilbur, that's not a chisel, THIS is a chisel.
Pam Niedermayer - Austin, TX
>And I think of all the hours and dollars I spent on ebay finding slicks. You'd think Rob would be more sensitive to my needs and provide this stuff in a more timely manner. 
Say, Kevin, do you know if it's A2 or O1?
Pam
Re: Wilbur, that's not a chisel, THIS is a chisel.
Kevin Adams
>Pam, the link doesn't say anything the type, hardness, or origin of the steel. Kind of surprised as LV usually provides a little more info. It's not exacty inexpensive either for not giving any more info. Of course, they also provide about the best return policy if you want to try it and then don't like it. I think you would really need to be doing a lot of large work to find a use for a slick like that vs. a wide chisel like Wilbur posts. And without further info, I would probably rather spend a little more for a new one from Barr or a fair amount less for a vintage one from a reputable source.
Btw, my post got delayed by the spam patrol (due to the link and I guess the reference to Crocodile Dundee)...guess I need to think about setting up a profile here. Have you done that?
Thanks.
Kevin
Re: Wilbur, that's not a chisel, THIS is a chisel.
Pam Niedermayer - Austin, TX
>Yes, I set up a profile, all is fine. It just took a few minutes more than I thought it should have, bunch of mucking about with passwords that required me to actually read the error messages before reacting.
As to the slick, I looked at the LV item and was very surprised by the lack of information. Three years ago I was searching for all sorts of timber framing tools, including slicks, for my workshop/studio build. Most of the slicks were very expensive, although as it turns out I didn't pay that much for 2" and 3" varieties.
Pam
Just the link, Kevin
Bill Houghton
>not the Crocodile Dundee reference - that's perfectly OK. I just meant to tease you.
All the old profiles were erased as part of the upgrade, so I had to re-establish my profile, and found it about the same as, maybe even a little easier than, most online fora that use profiles.
Let any of the moderators know if you run into problems in trying to set one up, and we can help, or at least try to (never thought I'd be in the position of having to fake knowing about computers, but here I am...).
Bill Houghton, moderator at times
Re: Wilbur, that's not a chisel, THIS is a chisel.
wilbur
>Dang.
You're right -- that's a chisel.
I had to spend some time last night consoling the 2" chisel I had been using for tenon trimming. 
Re: a potential problem
wilbur
>Scalpeling technique? Maybe, although scalpels are really not used in surgery as much as you might think. They are mainly used to get through the skin layer. Once you're in there, you really don't want to use a scalpel too much for fear of cutting something by mistake.
Without trying to sound like I'm bragging, I am good at suturing. I remember that during my surgery rotation I tried to do a good job with stitching -- so much so that my residents would make fun of me for trying to impress the attending surgeons so that I would get into the plastic surgery residency program of my choice -- all the time knowing that I had no intention at all of becoming a surgeon.
Even so, when I did ER rotations, I got comfortable enough with suturing that when kids came in with facial cuts that needed stitches, I did them myself rather than making the family wait hours for a plastic surgeon to come in. (I always gave the family the option -- they usually let me do it.) I also followed up those kids in my clinic to see how the stitching came out. The families were always happy with the result -- even the ones with girls with cuts on the face.
By the way, last night as I was using my chisel to fit the last tenons for the stretchers for my workbench, I did run into some downhill grain, and pared cross grain to get around that. But I would guess that 90% of my paring was done with the grain, regardless of which tenon face I was working on.
Stitching and craftsmanship
Bob Hackett
>The surgeon that did most of my shoulder and arm work was very careful about stitching and careful alignment when closing.He brought others in to show off how well he did and how all my tattoos lined up so well,something I appreciated greatly as some of his peers were not near as careful or kind around the artwork.
MB
Thanks for all that you do, Bill.
Kevin Adams
OT - docs and stitching
Bill Houghton
>The family practice doc we were using when our second son was born was so fond of needle work that he commented once, when the nurse was teasing him slightly about the precision of his work on one of us, that he had just finished sewing a dress for his wife - probably not using medical-grade needles, although he didn't say.
Manual dexterity
Pam Niedermayer - Austin, TX
>Suturing? Even better, since my point was that people with good manual dexterity would naturally prefer a chiseling approach and defend it to the death even when faced with superior alternative methodology. 
Pam
Re: Wilbur, that's not a chisel, THIS is a chisel.
Bill Lowrance in France
>For fiddly shaving where registration with adjacent surfaces is important, and you don't have a 2-inch chisel, a sharp low-angle plane blade can serve remarkably well...