More tool cabinet stuff
Dominic in Buck's County PA
>Hi gang,
Most of my morning was spent at a family funeral and I needed to get myself back in a better mood. And what better way to do that then spend some time in the shop? Right?
When I first built this tool cabinet back in 08, I had a pretty lousy layout for both cabinet door panels. Several months ago I converted one panel into dedicated "saw storage". Once that was done, the other panel needed attention. I needed to get my chisels out of the drawer they were in, and to hang up the assorted spoke shaves I use. The spoke shaves were taking up valuable real estate on one of my plane shelves. I also needed a spot to hang my new D-8 Panel Saw (courtesy of Daryl Weir) as well as a new flush cut saw, my brass plane hammer, and my chisel mallet. I also relocated my marking knives to a more convenient location.
I had been working on the new layout for a bit as well as the holders that were required. The chisels holders as well as the spoke shave(s) holder were both actually done back in Auguste of 09! All were made from scrap cherry, hickory, maple, and walnut. After I completed them they were given a coat of sealer then a coat of blond shellac.


The completion of these tool holders I can free up one of the large drawers and one whole shelf.
I still need to hang my rules and my winding sticks up. But they'll easily fit on the sides of the doors.
See ya around,
Dominic




