Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Using nails

Posts

Re: Using nails

#26

Your method is the one I was taught

Bruce, a MN Galoot

>and still use. The house we have now is the first one I've lived in where there is a single bank of cabinets all put up together with one face frame.

Bruce

Re: Using nails

#27

Re: I've seen installers do all sorts of goofy thi

wilbur

>I can see how screwing banks of cabinets together and lifting them as a unit can be more work than necessary if you were doing this solo. But just for discussion's sake, if (1) you have a crew, so lifting a bank of cabinets isn't a muscle deficit issue, and (B) if you are working in an old house project where you can't count on the wall being flat, I can see where assembling a bank of smaller cabinets together on the floor so that the fronts are flat and then installing the bank of cabinets together would be easier. This way you only have to shim the unit once against the non-flat wall, and would be a more efficient way to do this than shimming each cabinet unit as you installed it.

Re: Using nails

#28

Re: I'm not explaining something clearly....

ThomD

>That's cool, thanks for the idea. How would it be better than biscuits. They are very strong fast to install, and less noisy and dusty than a dado?

Re: Using nails

#29

Re: Using nails - Pocket screws

ThomD

>I hate them, don't have them, but this is the kind of place they get used. Actually the screws look quite good, strong, drywall characteristic thread, and a head type that is useful in cases where one doesn't want a bury.

Re: Using nails

#30

biscuits vs dados

Bill Tindall

>I can't believe we are having this discussion over here.

There aren' t many shops making cabinets that use dust and noise as a criteria for deciding how to make a joint. At least in my shop the dust from a dado is captured by the table saw dust collection and I doubt the biscuit machine, which I find I never use, is less noisy than the table saw.

I bought a biscuit machine, tried it for some things and never used it again. Can't say for sure why. It is noisy and throws chips about that are not easy to capture with dust collector. Applying glue is inconvenient. It is more time to do layout(maybe not if I was more practice). Joint is vastly less strong. The machine cost more than a dado blade. Bottom line is it is likely some irrational prejudice which makes me eschew the thing.

Re: Using nails

#31

Re: Using nails - Pocket screws

Paul M.

>I'm in the process of building a cabinet much much uglier than Derek's. Mine has plywood sides and typical face frame construction. I used pocket-screws (Kreg) joinery for the face frame, and also used pocket holes from the inside sides of the box to clamp the face frame on during glue-up.

But this is a utility box and nothing like that lovely wardrobe. I would hate to see pocket holes in a piece like Derek's.

Re: Using nails

#32

Theory and practice...

John in NM

>Even when you have a crew capable of lifting a large heavy cabinet, it is an inefficient method. Crew either stands around waiting to be needed, or has to drop the other job they are doing to go help lift, then pick the original job back up. Doesn't sound like a big deal, but when its just so easy to do it box by box, it doesn't make any sense to co-ordinate all these guys. The crew usually ends up wasting time on arguing how best to do the job too, also who is going to lift where, and the requisite joking around where you get three or more guys together to lift something.

As to shimming, its really easy to do box by box, easier than a large single I'd say. Take all the doors off, get the first box hung. Clamp the next box to the first so the face frames are flush, get the screws started and start shimming it and tightening screws so it all stays lined up. Repeat as necessary. This does assume that some effort is taken beforehand to determine where the high spot on the wall is and start the first one so that the box at the worst bulge will not stick out past the first box hung. That's just how I learned to do it, there are other methods, some probably better.