Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Help with eggbeater

Posts

Re: Help with eggbeater

#26

Re: Below freezing

Bruce, a MN Galoot

>I've repaired tools on the dining table, but never rebuilt a motorcycle engine. I'll have to run that one by LOML. :-)

Re: Help with eggbeater

#27

No need to explain

Bob Hackett

>I totally get it.

I only had to get the wife to understand that motor oil wipes right off linoleum,not so with rugs.After that it was all smooth sailing.

Did I mention I have a metal lathe in the kitchen?

MB

Re: Help with eggbeater

#28

Jesper, Denmark

Re:It still makes perfect sense today....

Jesper, Denmark

>The freezer is handy for cooling and the french fryer for heating the heads when you need to insert those press fit valve guides. Pop the guides in the freezer and heat the head in the fryer, and they slide in perfectly.'

The sink is perfect for rinsing of the lapping comound and the oven for drying the head afterwards.

Don't use the microwave though.......

Re: Help with eggbeater

#29

You say counter,I say workbench

Bob Hackett

>It`s all a simple turn of language.

Besides,you don`t want to put those high dollar tech books you`re referencing the co-efficients of thermal expansion in down on just anything.

Be sure to avoid that area of the granite that you use for lapping when you do research work.I find if I pull the knife drawer and put it on that area it both keeps me from stacking books/manuals there and keeps the knives handy to scrape the odd recalcitrant gasket.If the knife gets dinged during scraping then you can sharpen on the lapping station after replacing the drawer.

What`s important here is prior planning.

MB

Re: Help with eggbeater

#30

scott grandstaff

Getting away with It

scott grandstaff

>You're all married??

Ok how are you guys still getting over like this??

I mean, I can get away with very small stuff.

I have some space around the upstairs and minor repair or very small things being worked on.

But the days when a bench was considered living room furniture are long long gone.

If I even fail to schlep the tools and supplies back downstairs I get about 36 hours before I start getting "the face".

yours Scott