Re: The limitations of language
Sgian Dubh
>Perhaps your definition should really be 'semi-transparent' Bob. I accept your points that clear and transparent are essentially the same thing.
The colouring I did to the wood obscures the wood's natural colour. Between colouring the wood with ferrous sulphate and application a final clear finish were a couple of steps. First, after changing the wood colour I applied a thin coat of pre-catalysed lacquer to seal the grain so that paint used in the next step wouldn't alter the colour of the summer grown wood very much. Next I applied a water based wall paint and wiped it off very shortly after application. This hides the texture of the coarser spring growth, yet at the same time emphasises it by making it stand out in a different way than if you could see it in its natural form. Lastly, the whole job was polished with pre-catalysed lacquer to seal and protect everything below.
So, I guess your definitions are about right. However, when I did the job, and even now, I just don't think about defining things quite so precisely. I simply wanted to create an effect in a piece I was working on, knew how to do it, knew what wood species to use to achieve the end result, and got on with it.
It all seemed so simple at the time... but it could become significantly more complex if I let you persuade me to become much more analytical than I thought necessary, ha, ha. Slainte.



