Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

It's a small world after all *LINK*

Posts

Re: It's a small world after all *LINK*

#26

agreeed but unfortunately.....

Bill Tindall, E.TN

>I bought the ergonomic disaster before Veritas developed their plane. As seldom as I use it I am not about to buy another.

Re: It's a small world after all *LINK*

#27

Re: agreeed but unfortunately.....

charlie belden

>Insidious. Buy a tool to do something very specific. It isn't easy and comfortable to use but you try it anyway. The results are less than satisfactory and far from expected. You abandon the tool and it's use cause with THIS particular tool, it is a PITA to use and thus the results aren't so good.

Now a better designed tool comes along that is actually ergonomic to use - is easier to set up after sharpening the iron - no fiddling to set it back the right way - and works really nicely.

BUT - you already have a crappy version

SO - you won't get a good one, that does work

BECAUSE you already have one, albeit a crappy one

AND - have found a work around that probably isn't as quick or accurate or as easy as doing the job with a good version of the original crappy tool?

Inertia is an OK thing - if it keeps you where you're comfortable and satisfied. It's when you're not comfortable and satisfied - that it can become a problem.

As to planing tenon cheeks to fit an existing mortise - it's so very easy to make all the adjustments to one cheek rather than to make half the adjustment to each cheek. The result of all off one cheek is that one part may not fit proud of the other - and fixing THAT can be quite time consuming.