Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Saw carrier/tool box for Japanese saws?

Posts

Re: Saw carrier/tool box for Japanese saws?

#26

Re: wooden saw protectors

Pam Niedermayer, Austin, TX

>You practice, practice, practice. In this practice you'd learn to saw the piece on an angle for all but the end so gravity helps clear the kerf. Reverse directions often. Use a saw with properly spaced teeth (I'm assuming my rip single edge qualifies).

I agree that it would be difficult to stay in the middle of 1/4", but not impossible. It's really no different than following a line in a resaw effort except that you'd have to clamp the 1/4" piece carefully so it stays still.

Pam

Re: Saw carrier/tool box for Japanese saws?

#27

Glued wood paneling

Pam Niedermayer, Austin, TX

>Marv and Bill, I agree that a glued form would be much easier. Also, that paneling is great for making protectors, as demonstrated by having bought several saws that shipped with it with no damage. The only western saw I've bought in the last 8 years was a 28" Diston (sp?). It shipped with thicker wood protection, really a cage, most likely because it was so much heavier and longer than most of my Japanese blades.

Pam

Re: Saw carrier/tool box for Japanese saws?

#28

Re: Glued wood paneling

Marv

>Pam,

Did you buy your Disston on eBay? It is rare to get a saw that is wood protected. You should see how some sellers pack a saw. I bought four saws from a guy once and he just tossed them in a big box, no packing inside or anything. The saws tried to eat each other's handles. The seller got a not so nice feedback. Then there are sellers who over pack, wrapped with bubble pack with a half roll of tape wound around and around and around. Of course I'd gripe if I was hung with a new rope, so the saying goes.

What is your preference in writing style? Subject matter, etc? Will you be writing about woodworking related subjects? I tried writing once. I wrote my autobiography that covered my first 58 years. Took me 8 months. That was a lot of work. If not for the computer, I would never have done it. I learned how to type with more than two fingers during that time. I also learned that writing is only something I will dream about. I wrote my bio for my kids and grandkids. My kids read it but my grandkids can't relate and have no interest. Good luck and success with your writings.

Marv

Re: Saw carrier/tool box for Japanese saws?

#29

Re: wooden saw protectors

Marv

>I have made many a wood saw protectors. I start with a 1/4 or 5/16" piece that is much wider than the finished height. After I saw the groove I then cut it to the height I want. The extra height helps to keep it straight and solid while sawing the groove. The protectors I have made were mainly for backsaws. For regular handsaws, I just use a thin blade and saw the groove on my table saw. When sawing the groove in a backsaw protector, I try to always use the saw that the protector is for, even a crosscut. I start the groove with a rip, then finish with the crosscut when it's for a crosscut. I want a snug fit so the protector will stay on the saw by itself.

Marv

Re: Saw carrier/tool box for Japanese saws?

#30

OT - grandkids and history

Bill Houghton, Sebastopol, CA

>Maybe they can't relate now, but they may well later, when they're old enough to have a sense of history.

Re: Saw carrier/tool box for Japanese saws?

#31

Early 40s

Wiley Horne--So. Calif.

>in my experience is when you start wondering who you are and where you came from, and the genealogical search begins.

I was lucky and in most of our family branches, there was one person who had taken the time to write down the family tree to that point, as far as they knew it. In one branch, a distant relative had gone to great research effort, and even found the first ancestor on these shores.

The thing is, when the old folks are gone, they're gone. So find out what you can sooner, not later.

I think Marv's book is going to be most valuable to those grandkids, but they may need to be in their 40's before they figure it out. Marv, can you track your parents and grandparents and their parents back? That will really be valuable also.

Wiley

Re: Saw carrier/tool box for Japanese saws?

#32

Does Jay offer a class for the gate/fence project?

Alan DuBoff

>Bob,

Does Jay offer a class that builds that? I wasn't sure, the pics you linked to looked like a workshop/class of such.

I was curious if he offers that through Lane or not?

Cheers,

Alan

Re: Saw carrier/tool box for Japanese saws?

#33

Re: wooden saw protectors

Pam Niedermayer, Austin, TX

>Sounds like my approach were I to make protectors, although I don't have thin enough blades for the tablesaws. :)

How do you protect the spines of the backsaws? Or do you?

Pam

Re: Saw carrier/tool box for Japanese saws?

#34

Re: Saw carrier/tool box for Japanese saws?

Alan DuBoff

>Wiley,

I have been thinking a little more about this, and the type of saws are important here.

For Japanese saws, I wouldn't want to put any pressure on the blade itself, if possible. I have seen where the saw is suspended by the handle to remove any stress applied in storage.

I think in that regard, it makes sense that the best way to transport would be so that the blade is secure enough not to move around, but also so that the handle also has some support. To me it would make sense to transport them upside down, as the handle and top of blade on Japanese saws are typically flush, roughly.

The other thing I would want is some type of really good protection around/over the teeth. If they were my saws, I would want a hard protective box most likely so that something didn't fall on the teeth.

I have approached this from a western point of view, and slightly different, but the one piece in common is that I would want to not only be able to transport saws, but somehow have something that opens up into a saw holder, or stand for the saws while I use them. In your case that might mean that when it opened, you would have a stand with a simple slotted piece of wood on extensions, which supported them by the handle.

From the pure aspect of having a selection of saws how you mention, I want about 6 - 8. A similar amount that you mentioned. In your situation maybe a protective case that opened up and had a board with some extensions that attached to it, to support the saws while you used them.

I have a few tool rolls for chisels, rasps, and files. To me they are not ideal, but work ok. I would rather have protective cases that turn into stands, similar to how Yeung Chan's concept is, but I don't like the way he has his saw stored. :-/ I'm trying to incorporate some similar elements into my toobox, in that situation for timberframing tools.


img

Re: Saw carrier/tool box for Japanese saws?

#35

Re: wooden saw protectors

Marv

>Pam,

I only do the tooth protectors for saws that I do for other people. Not all saws, just certain ones. I don't make anything for the spines/backs but when packing for shipping I always slip a heavy gauge plastic bag over the whole saw.

For the saws I use, they just occupy a slot in a 2 x 4 on one of my benches where they are handy along with almost every tool I own. If I hang them up or put them in a drawer, I'll just have to take them down or search for them in a drawer the next day. :)

Marv

Re: Saw carrier/tool box for Japanese saws?

#36

Re: OT - grandkids and history

Marv

>Bill,

Some are in their twenties....Should I mention my Greatgrandkids? I started at a very young age. I've been in a production mode most of my years.

Marv

Re: Saw carrier/tool box for Japanese saws?

#37

Re: Glued wood paneling

Pam Niedermayer, Austin, TX

>Yes, bought the Disston on ebay. I'm pretty careful about sellers, though; in this case I got real lucky. The Japanese saws have been fairly expensive, so the ebay and retail sellers protected them, not a one was damaged in route (which was more than I deserved when I started with Japanese saws, promptly wrecked two of them).

Cute, asking about a post that's been deleted. Very cute. :) To answer your questions briefly (well, it's a goal): 1) Fiction, had to write too many manuals, user guides, and technical essays in my past life. However, "fiction" is a little misleading, a major conceit, since almost all fiction uses known human characteristics and behavior, even when the situation is totally fictional; 2) I started my novel (political thriller/mystery called "Welcome to Texas") about the 2000 presidential election in 2003 (not to get too political, but it seemed to be my only outlet for rage over Iraq), got about 10 chapters into it, workshopped it, learned real quickly that I didn't know squat, which was remedied by taking writing courses at UT Extension and outside workshops (there are more great writers in town than our size would predict), started writing short stories, love it all; 3) my autobiography is somewhat fictionalized and is 30 pages max, called "How to Become a Strong Woman." The other story incorporates magic realism; 4) During the last year two instructors/coaches have told me that those two stories are ready to publish, so I'm trying to transcend the associated fears and pick the right mags. It's a relief that I've actually made progress, but very scary; 5) My doppelganger heroine is indeed a woodworker, hope to do a lot of woodworking in the fiction, computer stuff, too; 6) I'm applying to grad school this fall. One program pays $25,000 a year for 3 years to study with them (Michener Fellowship), sure hope I get that one , but it's unlikely, very competitive. I'm back in the bowels of GRE's, filling out applications, polishing the stories even more; 7) Then I plan to spend the spring and summer rewriting my novel and getting the Vespa I bought today ready, just in case I get in, might even get up the nerve to beg the building permitters once more to let us rescue the workshop.

Pam

Re: Saw carrier/tool box for Japanese saws?

#38

Re: Early 40s

Marv

>Wiley,

My autobio includes some my Grand and GreatGrand relatives. I even have a few pictures of some of them.

Marv

Re: Saw carrier/tool box for Japanese saws?

#39

Re: Does Jay offer a class for the gate/fence proj

amelon

>Alan,

That's the class Jay teaches at Laney. You can sign up for Traditional Hand Tools & Joinery II, or Small Yard and Garden Structures, or Special Projects. They're all the same class but with different class codes so that students can get around the you-can-only-register-the-same-class-twice restriction. Most of us are returning students. In class, you can work on your own project, follow along with Jay in making various wood joints, or work on these special projects.

- Bob

Re: Saw carrier/tool box for Japanese saws?

#40

Re: wooden saw protectors

Pam Niedermayer, Austin, TX

>I see. I have 3 or 4 magnet bars that cling to the saws. If I have to travel with tools, I take the LV Pro Dozuki, just through it in. If I wreck it, I've got another blade, and it's not too expensive to replace it if necessary. It's small does cross and rip with speed.

Pam

Re: Saw carrier/tool box for Japanese saws?

#41

It's a big conceptual jump to go

Bruce, a MN Galoot

>from a Beemer to a Vespa! Remember your helmet.

Good luck with the GRE's. Even after 30+ years, I still quake when I think about them.

Bruce

Re: Saw carrier/tool box for Japanese saws?

#42

Re: It's a big conceptual jump to go

Pam Niedermayer, Austin, TX

>Nobody's getting rid of her Beemer, just getting a more casual dress scooter for getting to school in town. Thinking of hanging a sidecar on it for the huge pooch, should be lots of fun. Helmet, yes.

I'm not too worried about GRE's, the main thing is my fiction; but I just want to do well, can't hurt.

Pam

Re: Saw carrier/tool box for Japanese saws?

#43

wooden saw protectors

paul womack

>It's really no different than following a line in a resaw effort

Not so - resawing is normally done at an angle to the grain, where making a tooth protector is absolutely parallel.

The cutting action (and sawdust) are quite different.

BugBear

Re: Saw carrier/tool box for Japanese saws?

#44

Woodwork magazine

Bob Hackett

>Don`t tell me they`re thinking of closing the doors!

That would be a great loss indeed.One of my favorites,I have most of my father`s back issues.

MB

Re: Saw carrier/tool box for Japanese saws?

#45

Re: Glued wood paneling...OT

Marv

>Pam,

Wow, you are taking on a lot, but, why not? You sure know how to ward off Alzhiemers. Keep that brain muscle engaged doing things that produce enjoyment and fulfillment. Fiction writing requires research to make it believable but non-fiction requires a lot more research to make it truthful. Fiction would be my choice too.

I googled GRE test and see that there's lots of help online.

Vespa....now that's an impressive venture. What, you don't like Harley,s? You gotta be kidding about a sidecar, right? Wish I still had all the money I spent on motorcycles and related activities. I still have a 1973 750cc Triumph out in the shed that I haven't riden since around 1980.

My autobio is 213 pages plus a bunch of scanned pictures. Toward the end I got bored with it and started taking shortcuts, thinking, who the hell is going to be interested in all this blab? I tried to be truthful with it all, but had to leave out some experiences to protect younger minds who might read it. I started it with my oldest memory when I was two years old and just continued with all my memories of anything significant. In order to write about certain episodes, like when my dog Queenie was hit by a car and a neighbor shot her to put her out of her misery, I was surprised when all those emotions I experienced at the age of ten, all came forth as if it just happened.

Was it James Michener who wrote "The Source"? That is fiction that did require lots of research.

Marv

Re: Saw carrier/tool box for Japanese saws?

#46

It's pretty much gone *LINK*

Bill Houghton, Sebastopol, CA

>The new publisher, New Track Media, managed one issue, and a very good one, before shutting it down. The statement was that the economy made them do it; I've been a little puzzled all along why they bought it in the first place, if they didn't think the economy was strong enough to sustain it. While the two editors with whom I've had e-mail contact have been doing the loyal employee bit, it's obvious that they're really sad - they had a lot of respect for the magazine, and were looking forward to continuing its spirit.

There were expressed intentions of doing an online magazine starting about now, but when I go to the publisher's website for the magazine (link below), there's nothing new there since the one issue they produced in the Spring, and the website doesn't appear to be well maintained - linking to the full text of the lead article gets you a comments box.

Very sad. Forced to keep just two magazine subscriptions (not counting Fine Homebuilding, which helps me keep this ancient house going), I'd have taken Popular Woodworking and Woodwork in a heartbeat; forced to choose just one, I'd have been in an agony of indecision.


http://www.woodwork-magazine.com/

Re: Saw carrier/tool box for Japanese saws?

#47

Re: Glued wood paneling...OT

wilbur

>One of my dreams was to get a Vespa, which would have been a lot of fun in Chicago where I grew up. In the meantime, I've moved to New Jersey, which means that I would have to drive a Vespa and deal with NJ drivers, which is more than I want to take on at this point in my life.

Re: Saw carrier/tool box for Japanese saws?

#48

Writing

Pam Niedermayer, Austin, TX

>You may want to sell that Triumph, all the rage today.

It really surprised me that writing brought back piles of early memories and also brought me a whole new empathy for others, especially Jack.

It's not so much. To be honest, I'd have preferred to take the easy way and develop software til my end days; but the world informed me on 9/11 and the months after that it didn't need my software development skills. Had to do something, and writing has turned out to be a good choice.

Pam

Re: Saw carrier/tool box for Japanese saws?

#49

They're city vehicles.

Pam Niedermayer, Austin, TX

>

Re: Saw carrier/tool box for Japanese saws?

#50

Re: wooden saw protectors

Pam Niedermayer, Austin, TX

>Only part of the sawing is parallel to the grain, most of it can be at an angle.

Pam