Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Dumb question--screwdrivers

Posts

Re: Dumb question--screwdrivers

#26

Apples and oranges

Bob Hackett

>IME this isn`t an issue,at least not with marine grade plywood.

Remember that plywood was and is still used for aviation and marine use where it`s notched,grooved etc and then glued back together.Structural stability was a prime reason they chose plywood.A hollow core door is a completely different animal than ply IMO.

MB

Re: Dumb question--screwdrivers

#27

Re: Dumb question--screwdrivers

Cecil Nickerson

>Lee valley has one at $7.50Cdn used to install Blum hardware. It's a #2 Posidrive.

Re: Dumb question--screwdrivers

#28

Re: Dumb question--screwdrivers

Wiley Horne--So. Calif.

>Thanks Cecil. I went back and found that one. Actually it was the Blum screw I was thinking about using. But I believe Scott's idea of threaded insert is better than my original. May still go epoxy.

Thanks again, WIley

Re: Dumb question--screwdrivers

#29

Good

Bill Houghton, Sebastopol, CA

>Just wanted to raise the question, before Wiley went out and bought his Pozidrive screwdriver.

Re: Dumb question--screwdrivers

#30

I hadn't heard of the 'clutch' one...

Scott Burr in Ben Lomond CA

>Maybe not heard, but there all around you. Next time your making a deposit at the local diner or whatever, look at the screws holding the stalls together. Your guaranteed to see them. They mostly only go one way... in.

Re: Dumb question--screwdrivers

#31

Jim DeLaney, Austintown, Ohio

Re: I hadn't heard of the 'clutch' one...

Jim DeLaney, Austintown, Ohio

>They only go IN with a regular screwdriver. A $40 extractor set will remove them.

Those have pretty much been superceded by a whole bunch of different 'security screws' with varying heads, though.

The newer ones aren't so very secure, though, since you can even buy a set of drivers at Sears or Harbor Freight for around ten bucks.

Re: Dumb question--screwdrivers

#32

Clutch differs from security screws

Bill Houghton, Sebastopol, CA

>Clutch screws - as Jim DeLaney mentioned, GM used them on their cars - are, like Allen, Robertson, Phillips, Pozidrive, etc., a recessed shape in the screw head into which the driver fits. In the case of clutch screws, the driver is shaped kind of like a figure 8 but more angular.

GM finally gave up long after everyone else had dropped them. I picked up a driver some years back at a garbage sale, but have yet to find a need for it.

Re: Dumb question--screwdrivers

#33

Re: Dumb question--screwdrivers

Chris Friesen

>As others have said, there is a special posidrive bit, and screwdrivers are available though uncommon. (Seems to be easier to find individual bits around here.)

If anyone is interested in some background, the posidrive bit is very similar to the Phillips except that the walls of the X are straight rather than tapered. This reduces cam-out compared to the Phillips head. The extra little notches are basically nonfunctional and are there only to distinguish it from Phillips ones.

Re: Dumb question--screwdrivers

#34

Ding ding ding!

Joe Rogers, Northern Virginia

>And we have a winner! This is the primary difference bewteen Posidrive and Phillips. Given the experiences I have had with both I'd pick Posidrive any time given a choice.

JR

Re: Dumb question--screwdrivers

#35

Another twist

Roninkokomo

>Some sage in the last century said, with a great deal of wisdom, What you don't know is not your biggest problem. Your biggest problem is what you do know and don't know that it is wrong.

Re: Dumb question--screwdrivers

#36

Mark Twain's version was

Bruce, a MN Galoot

>It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so.